Wholesale 50ml 545 Hydraulic Pneumatic Sealant Thread Sealant

545 Pipe Thread Locking sealant (Same as henkel loctite 554)

Technical data sheet

545 Piping thread sealant features:

Hydraulic and pneumatic sealant.

Low strength, fast curing. Used for the sealing and locking of high pressure hydraulic system and taper thread below M36.

It won’t contaminate hydraulic system, and can be used on surface with light oil stain.

It contains no filing, and blocks no valves and filtering systems.

Use and storage:

1) Oil removal, clean and dry on the thread surface.

2) The thread standard (clearance, thread, screwing in more than 5 threads).Drop the glue in the external thread, the first thread can't glue, glue above 3 threads, screw in the tightening of specified torque, or the specified direction.

3) Fully cured by 24 hours, cure slowly below 15 ℃ and on inactive surface, use 7649 to accelerate curing.

4) Usually assembled with hand tools, 2 inches parts can be heated to 260 ℃ to remove.

    Note: Should not be used on plastic, cannot be used for pure oxygen and rich oxygen sealing system.Tube       need to keep enough oxygen to keep it liquid.

Contact Information: