101 Metal-Filled Epoxy Putty Repair Adhesive, Casting Defect Rebuilding Putty

Taisn 101 Casting Defect Rebuilding Epoxy Putty

Product features:

Double components, epoxy putty, general purpose. Used for repairing and restoring blowholes, shrinkage, flow marks and cracks in castings with defect size more than 2mm. Can cure at low temperature and humidity.

Physical Properties

How to use:

1.Surface Cleaning:

 Remove the oil and grease from the surface, also should be abrasived and polished.

2. Mixing

 Two-part, please mix and forge the two parts by equal ratio. It will become gel-formulation at the low temperature, it can change into soft gel heating by the heating producer.

 Notice: Do not heat with the open-fire

After 24 h room cure, it can put into use.

3.Coating

 First, coating the surfaces with some glue, and then push and repeat coating the surface until it exhaust the air and fully fill the gap. 

4.Curing

 When the room temperature is lower than 10°C, and after 1-2 h room cure, use heat producer heating for 3-4 hour bewteen 80°C, the heating producer between the parts should keep a distance of 300-400mm. and the small-area fittings can be put into the oven for heating below 80°C.

 (Heat Producer: infra-red lamp, electric stove, and other heating sources, not use the open-fire)

 5.Post-Processing

 After cured some time, it can be processed by ordinary ways, and wait for 18 hour, it can use the machine for processing.

Attention

1、When the temperature is below 15 ℃, some heating measures should be adopted; or the relevant curing time should be extended

2、When mix volume is more than 200g, the working time will be shorter

3、Above data is typical

Package:

500g/set, 16sets/carton

10kg/drum or customized

Contact Information