Automatic Stool Sensor,Induction flusher

Automatic sensor brass chrome flush valve

Power supply:DC 6v,220v,110v

Flush time:When people closed to the sensor, about 60cm in front of this product, it enters into induction status, automatically flush when people leaving, 6-second to 12 seconds flushing time.

Power static consumption:0.5mw/ less than 2w

Suitable for hydraulic pressure: 0.05-0.8Mpa
Sensing range: factory setting 60cm
The water pipe diameter: G (1) "(DN20)
Induction time: 2 seconds (less than 2 seconds)
Applicable environment temperature: 1-45
Flow rate: 0.12 (L/S)
Functional characteristics:
1, infrared sensor, automatic water off water, water saving, convenient, sanitary, can effectively avoid cross infection of bacteria.
2, the host is controlled by microcomputer, can be automatically adjusted according to the frequency and time flushing use the length of time, more effective to save water.
3, the machine average flush volume in place for the use of high frequency 1.2-3L, the frequency of use in low places per flush 2-4L (Note: the water pressure is 0.05-0.8MPa)
4, the built-in water control valve and filter, non professionals can easily adjust the water and filter cleaning.
5, when the tank is in long-term use, flushing will be 24 hours an automatic flushing.
6, Tibetan wall design, reflecting the integration of decoration and environment.
7, the machine can choose AC / DC two power supply mode, electronic key sensor design, more convenient and durable.
8, the use of DC products section 5 battery, use 300 times a day, no need to replace the battery within two years.