Alloy Pipe For Diesel Engines Small Diameter

Application:

Hydraulic props, high-pressure cylinders, high-pressure boilers, fertilizer equipment, petroleum cracking, automotive half-axle sleeves, diesel engines, hydraulic pipe fittings and other pipes.

10CrMo910 alloy steel pipe is divided into two kinds. Alloy pipe is a kind of seamless steel pipe, its performance is much higher than that of the general seamless steel pipe, because this kind of steel pipe contains more Cr, its performance is not comparable to other seamless steel pipe, so alloy pipe is widely used in petroleum, chemical, power, boiler and other industries.

On the basis of high quality carbon structural steel, one or more alloying elements are properly added to improve the mechanical properties, toughness and hardenability of the steel. Products made of such steels are usually heat treated (normalized or tempered); their parts and components are usually tempered or surface chemically treated (carburized, nitrided, etc.), surface quenched or high frequency quenched before use. Therefore, according to the different chemical composition (mainly carbon content), heat treatment process and use, this kind of steel can be roughly divided into carburizing, quenching and tempering and nitriding steel.

This kind of steel is mainly rolled (forged) into round, square and flat sections and seamless steel pipes, which are mostly used to make important and large-sized parts, high-pressure pipes, containers, etc. in mechanical products. This high-quality carbon structural steel has better comprehensive mechanical properties. 

What is a pe plastic pipe

Polyethylene (PE) is a thermoplastic material produced from the polymerization of ethylene. PE plastic pipe is manufactured by extrusion in sizes ranging from ½" to 63". PE is available in rolled coils of various lengths or in straight lengths up to 40 feet.Pipe Size Based on Controlled Outside Diameter (DR)

How to bend pe tube -pipe

PE pipe has its flexibility and can be bent and then straightened for use. During production, it can be bent and coiled into a coiled pipe of hundreds of meters. This is a normal bending situation. It can be straightened when used. Some bends in time are also possible. And using its bending characteristics, PE pipes can be laid without excavation, which does not affect its performance, and of course it can be straightened.

How to install fittings for the pe poly 3408 pipe underground road

1. Use a pipe cutter to cut the pipe according to the installation needs;

2. Mark the number at the depth of the pipe to be inserted;

3. Heat the die head of the hot melt machine to about 20;4. Heat the pipes and fittings at the same time, and then the socket (wait a moment to let go after the socket is in place, and it is forbidden to twist during the heating, socket, and cooling process;

5. Natural cooling;