Home > Products > ceramic balls > High quality ground ceramic balls with various alumina content
High quality ground ceramic balls with various alumina content
- 100000 Piece / Pieces per Month
- Qingdao
- T/T L/C D/P D/A Credit Card PayPal Other
Product Description
Basic Info.
Name | Long(L)mm | Outside diameter(R)mm | Internal diameter(r)mm | Notes |
Alumina Ceramic Tube | ≤500 | 30-450 | 30-450 | Tolerance of each dimension±1% |
Specifications
Name: | 99% Alumina Ceramic Tube | ||||
Size: | As your request | ||||
Content of Al2O3: | ≥ 99% | ||||
Density: | 3.9g/cm3 - 3.95g/cm3 | ||||
Max. Length | 2000mm | ||||
Usage temperature: | ≤1800ºC | ||||
Color | Ivory | ||||
Chemical component | |||||
Al2O3 | R2O | Fe2O3 | SiO2 | ||
≥99% | ≤0.2% | ≤0.1% | ≤0.2% | ||
Technical parameters | |||||
Volume density: | ≥3.80 g/cm3 | ||||
Apparent porosity: | <1% | ||||
Bending resistance: | >350 Mpa | ||||
Compressive strength: | >12000 Mpa | ||||
Dielectric conatant ε (1MHz): | 2 | ||||
Maximum usage temperature: | 1800C | ||||
Usage 1) Thermocouple protections; 2) Heat treatment furnace and toughened furnace; 3) Inner liner tube and heating tube in electric furnace; 4) Some are used in furnaces. |
Points to note for transport and installation
Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.
2. The yunfeng bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.
3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.
4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.
5. When using flange connection, the flange end shall be flush with the end of the composite pipe.
6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.
FAQ
01.How to buy your products?
A: You can provide us yourtechnical parameters.(connect us for more details).
02. How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
03. What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
04. How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
Contact
Twiter:@Daianna28364490
Facebook: Aana
Email:634107452@qq.com
Contact Us
- Qijing Trading Co., Ltd.
- Contact nameANNA
Alumina ceramic sheet | Alumina ceramic tube | Paper making equipment | ceramic balls |
Alumina Ceramic Plate | Papermaking equipment | Ceramic dehydration board | Mosaic |
Composite rubber ceramic plate |
- Cast Iron T-slotted Surface Plates/ Tables
- Cast Iron T-slotted Floor Tables/Plates
- Cast Iron T-slotted Clamping Plates/Floor Plates
- Cast Iron T-slotted Bed Plates/Floor Plates
- Cast Iron T-slotted Base Plates/Floor Plates
- sand casting and machining parts
- precision casting parts
- die casting and machining parts
- sand casting and machining parts
- precision casting parts
- die casting and machining parts
- sand casting and machining parts
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Custom Fabrication Services > Casting Services
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
ANNA
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-