ZSZ-2017 automatic conical paper tube production line

ZSZ-2017 automatic conical paper tube production line

ZSZ-2017 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.

Process:

Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing

Main Parameter:

Power:49.2KW 

Speed: 50/min

Size: 14000mm*6000mm*3800mm

Operator: 1

ZSZ-2017 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.

Main parameter:

For conical tubes with various taper and calibre.

Speed: 25-50/min

Power: 13.27kw

Size: 6080mm*2240mm*1500mm

ZSZ-2017 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.

The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.

Main parameter:

For conical tubes with various taper

Speed: 35-50/min

Air pressure: 0.3-0.4mpa

Size: 2600*1600*1580mm

ZSZ-2017 after finishing machine is designed to turn the semi-finished product into conical paper tube.

Process: Auto-feeding, auto-distributing, head-angling, V opening cut, pressing, galling, automatic counting, automatic stringing and drying. The machine has step-less transmission and can be adjusted freely. Be able to work in the production line or individually.

Main parameter:

For conical tubes with various taper

Speed: 30-45/min

Power: 11KW

Air pressure: 0.4-0.5 mpa

Size: 2940mm*2780mm*1430mm

Operator: 1

The ZSZ-2017 auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured Low consumption and high outcome. Paper tube can be feed and collected automatically after connecting with other equipment.

Main Parameter:

Speed: 25-50/min

Power: 10.1-24.5kw

Size: 5620mm*1700mm*3800mm