Heat Pack Products

Safe material PP Plastic Red Reusable Hot Cold Pack Microwave Heat packs For Lunch Box

Microwave Heat packs

Safe material PP Plastic Red Reusable Hot Cold Pack Microwave Heat packs For Lunch Box

Instructions For Heat Pack Products

This is a storage pack that needs heating,The inner material of this product is solid at room temperature,It needs to be heated by microwave oven or boiled water, and the heat storage material inside should be melted completely as far as possible, so as to absorb heat to the maximum extent and making the heat preservation time longer.

Matters needing attention for microwave heating:

1. Set the microwave on medium to high heat, not more than 5 minutes.In the process of heating, if you find the plastic box drum phenomenon, please immediately stop heating, to avoid the plastic box rupture, polluting the microwave furnace.(Note : About 3 minutes is appropriate, you know the temperature of the microwave oven is very high, the box will melt and burst over time.)

2. To avoid burns, bring gloves when you remove them from the microwave (Because the temperature about 70-80 degrees)

3. After removing from the microwave, check whether the internal material has completely melted. If not, please continue to heat for 30 seconds at a time.When the heat storage material is completely melted, it can be put into an insulated bag or insulated cooler box with food that needs to be insulated.

Matters needing attention for boiling water heating:

Put the product into hot water(more than 60 ℃ hot wate). After 10 minutes, check whether the internal heat storage material has completely melted. When all melted, take it out, it can be put into an insulated bag or insulated cooler box with food that needs to be insulated.

plastic food heat packs application:

Applicable to school, work to carry lunch, outdoor activities, tourism, take-out lunch need to keep the temperature field. Add a layer of flannel, can used for heating in winter.

Our Services

Accept Customize cooler bags

 Based on your design open a new mould

 Color: any panstone; Material: HDPE plastic

 Logo:Engraving

 Sample time:10 days after

 Artwork format:AI,PDF,ect

 Mass production lead time:15-20days

Accept Customize Packaging

Type: label,display box,opp bag,shrink film,ect.

Material:Paper, carton etc

Sample time: 7 days after design be confirmed

Artwork Format: AI, CorelDRAW,Photoshop, PDF, etc.

About Jisi Cold Chain Technology Co,ltd specializing in the production of plastic material ice pack cooling elements, We are the factory, from the plastic box production to liquid filling is completed by ourselves.
So we can according to the needs of customers, to custom any shape,any specification,any color and even to design according to customer's idea.
In addition,for the gel cooling liquid,We can also according to customer requirements to custom different temperature of phase change material (PCM),it can be 0-8degree C, -10degree C -15degree C -18degree C,-20degree C,-30degree C ect. The company also constantly improve products, to provide you with more choices.