300,000-2,000,000 Kcal/H Natural Gas LPG Oil Diesel Fired Heat Transfer Hot Oil Boiler, Thermal Oil Boiler for Oil processing industry

300,000-2,000,000 Kcal/H Natural Gas LPG Oil Diesel Fired Heat Transfer Hot Oil Boiler, 

Thermal Oil Boiler for Oil processing industry

thermal capacity:350kw-1400KW

Working pressure:0.8-1.0 MPA

Outlet temperature:320 C

Available fuel:natural gas, coke oven gas, bio-gas，liquefied petroleum gas, diesel, heavy oil, light oil, crude oil

Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

Heat Transfer Fluid heaters (hot oil heater) to oil (gas) as fuel to oil as medium, using hot oil circulation pumps mandatory medium for liquid circulation, the energy delivery device and then return to Heat re-heating furnace with low pressure in the working temperature was high, and can run on medium high-precision control. System with high thermal efficiency, due to the overall module installation, operation and easy maintenance, is a safe, efficient, energy saving ideal choice for heating equipment.  

Features of organic heat transfer thermal oil boiler

1.High heat efficiency ,special structure ,could keep total heat efficiency up to 100%.

2.The control of the oil temperature will be concise within the range from -1°C to +1°C.Under low working pressure of 0.8Mpa,boiler could achieve working temperature of 320°C.

3.There's a connection for the inert gas on the front shroud and it could fill 3 times of the capacity of the furnace with inert gas within 15 minutes in case of emergency to protect it and thus extend the life span.

4.Fully shop-assembled ,save transportation cost and installation fees.

5.The boiler operates automatically and will get rid of misconduct .With a nuclear PLC ,the percentage will be adjusted automatically and the monitor will be ral time ,together with the chainining protection.

Technical Parameters:

Boiler Feature

1.Thermal oil boiler is a special once-through type boiler developed on the basis of forced circulation

2.Tthe coil structure ensure sufficient heated surface and a high thermal efficiency.

3.Reasonable structure, complete auxiliary facilities,short installation cycle, easy operation and maintenance, simple boiler layout.

4.The fuel is burnt adiabatically in the combustion chamber, hence it provides easier ignition  more sufficient combustion and higher thermal efficiency

5.In addition to thermal oil,light oil, heavy oil, diesel oil, natural gas, coal gas, biomass fuel,pure coal or mixed coal and biomass fuels are available as well.

FAQ

What is the highest temperature that thermal oil heater could achieve?

thermal oil heater can reach as high as 330℃, and working under low pressure (<1.0MPa)

YY(Q)W series horizontal type oil gas fired thermal fluid heater.

What are the heat-resistance temperature of grate and furnace?

The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100℃, and the lower temperature could be 700℃.

The highest heat resistance temperature of furnace could be about 1700℃~1800℃.

What is conduction oil/ hot oil / heat transfer fluid?

Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350℃, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.

What about the maintenance?

I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.