Stainless steel powder sintered filter disc for filtration &separaion bubble diffusion corrosion resistance

Packing in vacuum cartons or wooden cases

1.Stainless steel powder sintering filter element

The stainless steel powder sintered filter element is made of ultrafine stainless steel powder sintered at high temperature. By selecting the powder particle size and process parameters, the pore size and distribution can be adjusted. It is especially suitable for replacing the titanium rod filter element in the decarburization process of pharmaceutical industry.

2.Main technical parameters

Filter aperture: / 1/3/5 / 1-100um)

Material of filter element: 316 Lpowder

Operating temperature: 0~450℃

Diameter: 18.20.25.30.40.50.55.60.70.75.80(mm)

3.The main features

1.1. Controllable pore size and porosity, high filtration accuracy

2.2. Good permeability and small initial pressure difference

3.3. Corrosion resistance, can be used in highly corrosive environment

4.4. High mechanical strength, good stability, can work under high pressure difference

5.5. High temperature resistance

6.6. Renewable and long service life

4.Typical application

1.1. High temperature steam and gas filtration

2.2. Filtration of oil slurry and other petrochemical products

3.3. Filtration and recovery of solid catalysts

4.4. Ozone disinfecting water filtration in food production process

5.5. Filtration of chemically complex liquids

6.6. Filtration of liquid and gas under high temperature and pressure