0.8 mm~3.2 mm Sino Erli MG410 Mag Argon Oxygen stainless steel 410 welding wire S410/ ER410

The main component of the welding wire is 13Cr, which is a martensitic stainless steel MIG welding wire, it can be welded in all positions. Excellent welding workability-smooth wire feeding, stable arc, beautiful shape, and very little spatter.
It is often used in wear-resistant and corrosion-resistant applications such as hydropower stations and valves, such as 12Cr13 (SUS 410).

Attention:

1. Shielding gas: pay attention to the purity of the shielding gas, the recommended mixture ratio is Ar+1~3%O2.
2. Gas flow: 20~25L/min.
3. Dry elongation: 15~25mm.
4. Remove the rust, moisture, oil, dust, etc. from the welding part.
5. When welding outdoors, wind-proof measures should be taken when the wind speed is greater than 1.5m/s, and appropriate wind-proof measures must be taken to prevent air holes.
The above suggestions are for reference only, and the actual conditions on site shall prevail in specific operations. If necessary, perform process qualification first and then determine the welding plan.