0.8 mm~3.2 mm Sino Erli MG430 Mag Argon Oxygen MIG stainless steel 410 welding wire S410/ ER410

The main component of the welding wire is 17Cr, which is a ferritic stainless steel MIG welding wire, which can be welded in all positions. Excellent welding workability-smooth wire feeding, stable arc, beautiful shape, and very little spatter.
It is often used in the welding of components in wear-resistant and corrosion-resistant applications, such as 10Cr17 (SUS 430) materials, guardrails, golf heads, etc.

Attention:

1. Shielding gas: pay attention to the purity of the shielding gas, the recommended mixture ratio is Ar+1~3%O2.
2. Gas flow: 20~25L/min.
3. Dry elongation: 15~25mm.
4. Remove the rust, moisture, oil, dust, etc. from the welding part.
5. When welding outdoors, wind-proof measures should be taken when the wind speed is greater than 1.5m/s, and appropriate wind-proof measures must be taken to prevent air holes.
The above suggestions are for reference only, and the actual conditions on site shall prevail in specific operations. If necessary, perform process qualification first and then determine the welding plan.