Peek is awesome#ANTI-STATIC PEEK stick#Peek Rod Factory

Imported Peek Rod: This material has excellent dielectric properties until the temperature reaches 260 °C. And can resist energy radiation, anti-corrosion and other important properties. It is a high-temperature Thermoplastic, with a high glass transition temperature (155 °c) and melting point (334 °c) , load thermal deformation temperature up to 335 °C (30% glass fiber or carbon fiber reinforced grade) , can be used for long-term at 250 °C, compared with other high-temperature resistant plastics such as PTFE , PPO, the upper limit of temperature for use is nearly 50 °c higher; Peek Rod not only has better heat resistance than other high-temperature resistant plastics, peek Rod has high strength, High Modulus, high fracture toughness, excellent dimensional stability and radiation resistance; Peek Rod can maintain high strength at high temperature, its bending strength at 200 °C is about 24 MPA, at 250 °C, the bending strength and compressive strength of PEEK RESIN ARE STILL 12 ~ 13 MPA; Peek Resin has high rigidity, good dimensional stability, small linear expansion coefficient, very close to the metal aluminum material; Only concentrated sulfuric acid can dissolve or destroy it. Its corrosion resistance is similar to that of nickel steel. At the same time, it is flame-retardant by itself, the excellent fatigue resistance to alternating stress is outstanding among all plastics, comparable to alloy materials; PEEK rods have outstanding tribological properties, excellent sliding wear resistance and fretting wear resistance, in particular, it can maintain high wear resistance and low Coefficient of friction at 260 °c; PEEK has excellent comprehensive properties, good mechanical properties, high temperature resistance, excellent chemical resistance, making it a general-purpose plastic. Peek Rod: high-grade Plastic Poly (ether ether ether ketone) PEEK main technical specifications, introduced PEEK (poly (ether ether ether ketone) has excellent comprehensive properties, good mechanical properties, high temperature resistance, excellent chemical resistance, the tensile strength MPA92.2‰50 dielectric strength Kv/mm190 polyether ether ketone PEEK material has the following characteristics: 1: Peek Rod High Temperature Resistance Property: glass transition temperature up to 151 °C, melting Point 348C, GF or CF filled, thermal deformation temperature up to 326C or above, UL approved long-term use temperature 260 °c 2: Peek PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK excellent mechanical properties: toughness and rigidity in all the resin perfect combination of materials, its strength and fatigue resistance even better than some metals and alloys. 3: Peek Rod polyetherketone Rod flame retardancy and low smoke: no additional flame retardancy is required and the 1.45 mm thick sample can meet the UL-94 V0 standard, and the smoke volume is obviously lower than other varieties of resin. Chemical Resistance of PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK Peek Peek Peek Peek Peek Chemical Resistance, PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK It is an excellent anti-corrosion material. 5: Peek Rod polyetherketone Rod hydrolysis resistance: In high temperature steam and long-term immersion in hot water can still maintain good mechanical properties, is in all resin hydrolysis resistant varieties. Peek PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK PEEK. 7: Peek Rod polyetherketone Rod Electrical Properties and insulation: In high temperature, high pressure, high speed, high humidity environment still has excellent insulation and stable electrical properties. 8: Peek Rod polyetheretherketone Rod radiation and weather resistance: have excellent resistance to a variety of radiation, can withstand high doses? Gamma radiation can be used in various harsh environments because of its various characteristics. Peek Rod polyetheretherketone rod high purity, low volatility and non-toxic: Peek Rod polyetherketone Rod Resin itself is not toxic, its molecular structure is very stable, not easy to produce volatiles, and radiation resistance, the purified high-purity Resin is an excellent bio-medical material