Small and medium-sized domestic waste industrial waste medical solid waste incinerator equipment

Supply printing, printing and dyeing industry waste incinerator

With the rapid development of the society and the acceleration of the process of industrialization, the industry receives a large number of industrial hazardous wastes and seriously pollutes the environment.Specializing in the production of various sewage treatment environmental protection equipment, industrial waste incinerator, air flotation machine, mechanical filters, belt filter press, etc., medical waste incinerator has a wealth of production and design experience, advanced equipment technology, reasonable price, good after-sales service.

Equipment description:

Combustion process and brief description: the wastes are put into the primary combustion chamber of the furnace body manually, and the primary combustion is started by automatic temperature control. According to the principle of three T (temperature, time and eddy current), the wastes are fully oxidized, pyrolyzed and burned in the combustion chamber of the furnace body.The flue gas from incineration enters the secondary combustion chamber, and the unburned harmful substances in the flue gas are further destroyed in the secondary combustion chamber.In order to completely decompose the unburnable material and meet the discharge requirements, the secondary combustion chamber is equipped with a burner to support combustion and a unique secondary air supply device to ensure that the flue gas is fully in contact with oxygen at high temperature, while ensuring the stagnation time of the flue gas in the secondary combustion chamber and adjusting the air supply according to the oxygen content of the flue gas at the exit of the secondary combustion chamber.Two combustion indoor temperature control and through the dust collector to remove dust particles larger, the burning efficiency and removal rate of more than 99, to no peculiar smell, no stink, smoke-free effect, meet the national discharge standard, and then into the chimney emissions into the atmosphere, after burning ash produced by artificial remove, screening, transfer and buried.

Applicable incinerators:

(1) industrial wastes: plastic PE, PU, rubber (tire), fiber, foam, cloth, resin, plexiglass, leather, cattle dander, laminate, bakelite powder, urea powder, vegetable vegetable cloth, tapes, coatings, polymer, etc.;

(2) medical waste: needles, gloves, bags, gauze, blood transfusion tubes, viscera and other infectious waste;(3) general garbage: cardboard, paper scraps, wood chips, leaves, etc.;

(4) special wastes: waste oil, waste solvents, sludge, dust collection pool, iron paint, mold screen residue, etc.

Compared with direct combustion furnace and other furnaces, gasification incinerator produces very little dust.Under high temperature, the combustible gas in flue gas can fully burning, can the high efficiency of the gasifier of gas and air mix combustion, prevent carbon material escape and late burn in momentum, the phenomena of flue gas in high temperature burning chamber with tangential to enter and combustion-supporting air, the adoption of tangential and tangential combustion air into the combustion mode, such as the flue gas in the burning room to fully burning of spinning air flue gas dust removal at the same time, burning in furnace flue gas residence time is greater than 2 seconds, make the combustible gas in the flue gas and the fuel burn completely in the fly ash,In the upper part of the incinerator, dry tail gas purification equipment is set up to absorb hydrogen chloride and sulfur oxides produced in the incineration.The flue gas purification system is equipped with calcium hydroxide filter brick for neutralization reaction with acid gas to achieve the purpose of absorbing acid gas and purifying exhaust gas.

Main features:

1. The system adopts automatic control technology to monitor and control the important parameters in the incineration process, with a high degree of automation.

2. There are automatic solid waste and waste liquid transfer devices and automatic ash discharge system to avoid secondary pollution caused by manual operation.

3, the process is reasonable, the use of advanced technology to treat solid waste and water, concentrated liquid and water separation, reduce the operating cost.Realized the resource.

4, the use of imported diesel burner, stable performance, furnace heating fast, oil consumption, full combustion, no secondary pollution, low noise.

5. Small size and small floor area！