Home > Products > PoE Switch/Injector > 6-port 10/100/1000M Industrial PoE Switch managed, 4 RJ45 ports and 2 Gigabit SFP
6-port 10/100/1000M Industrial PoE Switch managed, 4 RJ45 ports and 2 Gigabit SFP
- 1000 per Month
- T/T Credit Card
- 12-port gigabit Industrial PoE Switch managed, 8 poe ports and 4 Gigabit SFP
- Security Camera Cctv Camera Ip Camera 24 Port Gigabit Poe Industrial Ethernet Network Switch 48V 26 Port Din Rail Mini Outdoor
- 10/100M 4 port PoE Switch + 1/2 100M RJ45 Uplink port IEEE802.3 af/at compliant total 65W
- POE Switch 10/100M 8 port PoE + 2 100M RJ45 Uplink port IEEE802.3 af/at compliant total 120/150W
- 48 port poe switch 10/100M with 2 1000M RJ45 Uplink port IEEE802.3 af/at compliant Total 800W
- 24 port poe switches 10/100M + 2 1000M RJ45 Uplink port+ 2 Gigabit SFP port IEEE802.3 af/at compliant
Product Description
IEEE 802.3af/at 4 PoE Ports 10/100/1000M Industrial managed poe switch with 2 SFP uplink port
Description:
The ZX600M-AFG-42F&ZX600M-ATG-42F device is a kind of industrial PoE media converter, it support 4 10Base-T/100/1000Base-TX POE port and 2 gigabit SFP slots. These converters are classified as power source equipment (PSE), and when used in this way provide up to 15.4 watts IEEE802.3af & 30 watts to IEEE802.3at compliant powered devices (PD), eliminating the need for additional wiring.
It provided some kinds of advanced network managed function, like as: Ring redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring, fault alarm and firmware upgrade online. SW-Ring can bring your Ethernet to intelligent redundancy. Standard Industry design, can satisfied every requirement of the industry scene. All components used industry grade, it takes products high reliability. It provided wide voltage power supply input.
It support CE, FCC ROHS standard, adopt industry standard design, IP30 protection, rugged high-strength metal case, Dual power supply input (DC48-55V), -40 to 75°C working temperature. The converters support IEEE802.3/IEEE802.3i/IEEE802.3uIEEE802.3ab/IEEE802.3z with 10/100/1000M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
The main features:
- Support 4 10/100/1000Base-TX POE port and 2 Gigabit SFP slot and 1 console port
- Support:IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3z/ab,IEEE802.1Q,IEEE802.1p, IEEE802.1D/W IEEE802.3af/at, store and forward
- L2+ features provide better manageability, security, QoS, and performance.
- Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc
- Support spanning tree STP(802.1D) and RSTP(802.1W). 802.1s (MSTP) way exchange time<50ms
- Jumbo frames support up to 9.6K kilobytes.
- Support enhanced management tZXough WEB, CLI, TELNET, SSH, SNMP
- Compatible with both IEEE802.3at(30W) and IEEE802.3af (15.4W)
- Ethernet port support 10/100/1000M self-adaption and PoE function
- IP30 protect grade, high strength iron shell, DIN35 Rail installation
- Industrial grade 4 design, -40 to 75°C working temperature.
Specifications:
Product Name |
6 ports Gigabit Managed Industrial PoE Switch |
Product Model |
ZX600M-AFG-42F; ZX600M-ATG-42F |
Interface |
4x 10/100/1000M copper RJ-45 ports, 2x 1000M SFP port ,1 console |
Network Protocols |
Support IEEE802.3,IEEE802.3u,IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.1d, IEEE802.1w |
L2 ( Layer 2 Switching ) |
|
Port management |
Enable / disable port Speed, duplex, MTU settings, etc. Flow-control flow control setup Port information view, etc. Support port access direction, VLAN image To support the port speed limit, Support port isolation settings Unknown unicast, multicast, broadcast storm suppression |
Spanning Tree Protocol |
Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
Link Aggregation |
Support static manual aggregation, Support LACP dynamic convergence IEEE 802.3ad |
VLAN |
Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ;n Support Port based VLAN and IEEE 802.1Q VLAN |
IGMP snooping |
Support static add / delete, Support v1/2/3 dynamic multicast listener, supports 256 multicast groups |
GMRP |
supports GARP multicast registration protocol |
MAC |
Support static add / delete MAC address learning limit Support dynamic aging time settings |
Extended function |
|
ACL |
based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number Support time-range time management |
QOS |
based on 802.1p (COS) classification Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy Support traffic speed limit CAR |
MPLS |
MPLS supports static LSP Support VPN MPLS |
LLDP |
supports LLDP link discovery protocol |
802.1x |
Support 802.1x port authentication (Radius, local) |
Prevent attack |
DOS defense Support for CPU protection, limited to send CPU message rate ARP binding (IP, MAC, PORT binding) |
system management |
User add / delete user User login, operation, status, event log Device reset, configuration save / restore, upgrade management, time setting, etc. |
management function |
|
CLI |
support serial command line management |
TELNET |
support serial command line management |
SSH |
supports SSHv1/2 remote management |
SNMP |
support v1/2/3 |
ColdStart, WarmStart, LinkDown, LinkUp |
|
WEB |
supports two layers, tZXee layers of view, etc. |
Other parameters |
|
PoE Specification |
PoE Standard: Supports both IEEE802.3af and IEEE802.3at |
Single PoE Port Power Output: Max. 15.4 watts (IEEE 802.3af) Max. 30 watts (IEEE 802.3at) |
|
PoE port Auto detect AF/AT devices |
|
PoE Port Output Voltage: DC48V |
|
Power Pin Assignment:1/2+;3/6- |
|
Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
Fiber Media |
Multi-mode: 1310nm, 2Km Single-mode: 1310nm, 20; 1550nm, 40/60/80Km |
Performance Specification |
Bandwidth: 24Gbps |
Forwarding Mode |
Store-And-Forward |
LED Display |
Fiber Run indicator: FX1,FX2 Power supply indicator: PWR PoE ACT indicator: LED-Yellow 1000M LINK indicator: LED-Green |
Power Supply |
Input Voltage: DC48V (48~55V) Type of input: 6 pins terminal block No-load consumption: MAX 5W@ DC52V0.1A Full-load consumption: MAX 65W@ DC52V1.25A (802.3af) Full-load consumption: MAX 104W@ DC52V2A (802.3af+) Full-load consumption: MAX 130W@ DC52V2.5A (802.3at) |
Working Environment |
Working temperature: -40~75℃ Storage temperature: -40~85℃ Relative Humidity: 5%~95 %( no condensation) |
Industry Standard |
EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Mechanical Structure |
Shell: IP30 protect grade, metal shell Installation: DIN-Rail or Wall mounts |
Certification |
CE mark, commercial |
MTBF |
300,000 hours |
Warranty |
5 years |
Contact Us
- Shenzhen Rollball Comm-Tech Co., Ltd
CWDM/DWDM Mux/Demux | Fiber Optic Cabling | Fiber Optic Splitter | Fiber Optics |
Fiber Transceiver Module | Media Converter | PoE Switch/Injector | Ungrouped |
- 16port POE Switches 10/100M 16 POE ports + 2 Gigabit Ethernet ports IEEE802.3 af/at compliant
- 16 10/100M POE ports + 2 10/100/1000M Ethernet ports +1 Gigabit SFP Uplink Port IEEE802.3 af/at compliant total 300W POE Switch
- Switch POE 10/100M 24 port PoE + 2 1000M RJ45 Uplink port IEEE802.3 af/at compliant total 360W
- 10/100 POE 4 port switch 48V 15.4w over cable 5 cable 100 meters with American standard power plug
- Nice price 10/100/1000M 15.4w poe switch 8 port without uplink port
- Buy direct from China factory 10/100M 4port poe centralized power supply 60w poe mid span
- 1x8 1x16 DWDM MUX/DEMUX ABS box WDM Multiplexer
- 1X8 1X16 CWDM Mux/Demux Dual fiber compact ABS Box LC/SC connector
- 16-port 1550nm wdm CATV EDFA amplifier 30dbm
- 8-port 1550nm CATV EDFA amplifier with WDM
- 8/16/18 channels Rack mount Dual fiber CWDM Mux/Demux 1270~1610nm
- 1-channel DWDM OADM 1 fiber in/2 fiber out Add/Drop LGX box/100 GHz Rollball
- 1550 nm FTTH CATV PON Combiner Fiber Optical Amplifier 16 Port WDM EDFA
- 16port SC/APC 21dB WDM EDFA 1550nm catv edfa combiner
- Top Quantity Optical Add-Drop Multiplexer 1x2 DWDM OADM Module
- 1550nm EDFA 16/32/64 ports 22db 24db WDM Fiber Optic Amplifier EDFA
- FTTH CATV PON Combiner Fiber Optical Amplifier 16 Port WDM EDFA 1550 nm Price
- 32 port 32dbm1500nm WDM EDFA Amplifier prices
- 2/4/8 port WDM EDFA Amplifier 1550nm each port output power 15~24dBm
- C-Band Single Channel optical Pre-Amplifier EDFA for DWDM Network
- 1550nm CATV Optical Amplifier EDFA/1550nm EDFA
- CWDM MUX/demux 1450-1610nm Dual Fiber LGX module Multiplexer/demultiplexer 8 Channels
- 40 Channels C21-C60 Dual Fiber DWDM Mux Demux, 1U Rack Module, EXP+Monitor port optional, duplex LC/UPC
- 18 Channels 1270-1610nm Dual Fiber CWDM Mux Demux, 1U Rack Module
Popular Searches
Find Similar Products By Category
- Consumer Electronics > Computer Hardware & Software > Network Switches
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-