- EL-15S 0.1-15W Timing Wireless Broadcasting FM Broadcast Transmitter w/ Antenna For U Disk MP3
- TZT100X Shortwave Amplifier 100W Shortwave Amp for IC705 G90S X5105 FT818 KX3 QRP Radio Stations
- AT-108 Digital ESC Attenuator SMA 0.5-3GHZ 40DB Dynamic Range 0-5V Control RF Attenuator Module
- 2-50MHz Clock Multiplier Module Frequency Multiplier Module
- up to 150Mhz Clock Divider Frequency Divider Module
- 10MHz OCXO Crystal Oscillator Frequency Reference with Board
VU1-PRO VU Meter Audio Switcher with RCA XLR Switch Microphone Pickup Atmosphere Light
VU1-PRO is a multifunctional device that integrates VU meter and RCA/XLR switcher. While switching audio signals, you can enjoy the visual experience brought by VU meter. It supports two audio signal processing methods, DB and AGC, and provides super wide input signal range up to 5Vrms. At the same time, it supports manual and quick adjustment of pointer swing sensitivity and range, and you can quickly set VU1-PRO to work in the best working state. VU1-PRO also has a built-in microphone pickup, no need to connect an audio cable. You can also enjoy the effect of the VU meter beating with the rhythm of the music.
- Audio input/output: stereo RCA or XLR
- Power-down setting save function: support
- Backlight brightness adjustment: support
- Microphone pickup function: Built-in microphone pickup, you don’t need to connect an audio cable. As long as there is sound
- Audio switcher: support RCA to XLR or XLR to RCA, mutual conversion
- One-click filtering of environmental noise: support
- Working voltage: DC 5V 1A and above
- Backlight type: Tungsten lamp. Working voltage 9-12Vdc
- VU meter diameter: 35mm
- Machine size: 150*115*44(mm)L*W*H
- Net Weight: 550g
ACG & DB Mode Description:
- AGC: The automatic gain mode is actually a compression mode. The function is the same as the professional VU driver board. It is a square root audio compression. When the volume is low, the compression is very small. The larger the volume, the greater the compression. The maximum is 3 times compression ratio. So in this mode, the pointer beating is more suitable for daily use. It is more consistent with human perception.
- DB mode: No compression. The pointer and the volume are 1:1. For example, it is not actual data. If the input voltage is 0.1V and the pointer swing angle is 10 degrees, then input 0.5V and the pointer will swing 50 degrees. This mode is more suitable for situations where you need to know the true level.
One-Click Filtering of Environmental Noise:
First play the music normally. Use the GAIN knob to set the pointer in the appropriate range, that is to make the pointer jump about 50% to 90% of the dial, and then pause the music. Long press DB/AGC button for 3 seconds and keep it. Until the 4 LED lights (MIC/LINE/DB/AGC indicator lights) light up, release the button to enter the environmental noise filtering function. The system will set a fixed threshold according to the collected actual environmental noise intensity, filter out the highest noise, and the time will last about 3 seconds. When the setting is completed, it will automatically exit the setting. 2 LED lights of the 4 LED lights will turn off, indicating that the setting has been completed. Just play the music again at this time. Note that before this function is exited, in addition to the real environmental noise, do not artificially make other sounds, such as talking, or playing other music or moving the machine will affect the setting inaccuracy.
The environmental noise filter function can only filter up to 50% of the maximum value of the pointer swing, and the noise beyond this position cannot be filtered. It is recommended to adjust the GAIN to reduce the swing range of the hand.
Once the environmental noise filter function is set, it will work in both LINE and MIC modes. If you plan to restore the default value without powering on, you can adjust GAIN to the minimum and then enter the environmental noise filter function again.
It should be noted that the setting value of the one-key filter environment noise function does not support power-off saving. After power-off, (referring to unplug USB power supply), it will restore the default value when it turns on again. In the soft shutdown state, it is only shut down by pressing the key if the USB power cord continues to supply power, the set value can be temporarily stored in the memory.
- 1 x VU1-PRO
- 1 x Screwdriver
- 1 x USB Cable
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!
Q1: The Meter's pointer is fuzzing, even when there is no music.
A1: Resolution 1: The USB power supply is of poor quality. The power supply has large ripples and causes great interference. It is recommended to change to a better USB power supply.
Resolution 2: VU1-PRO and player's audio source share a USB power supply. This causes common ground interference. Please be sure to supply VU1-PRO separately.
Q2: The backlight brightness of the two meters of the machine is not the same.
A2: VU1-PRO uses a tungsten bulb as the backlight of the meters. During transportation, the tungsten filaments in the bulb may become entangled and shortened due to vibration. The internal resistance becomes smaller. Therefore, the brightness is different. You can manually adjust the backlight of the two meters by adjusting the resistance of the backlight brightness on the rear panel of the machine.
Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China
- Shenzhen Tianzhongtian Trading Co., Ltd.
|household products||Metal Detector||Tester Equipment||Ungrouped|
- Upgrade 1KHz-62MHz 16Bit Shortwave SDR Radio Receiver For Kiwisdr Without Board For Raspberry Pi
- 10MHz Sine Wave High Stability 10MHz OCXO Frequency Standard Reference Board For Radios
- RX-888 MKII SDR Radio Receiver SDR Ham Radio Receiver for LTC2208 16Bit ADC Direct Sampling R828D
- Musical Paradise MP-501 V5 Class A Tube Amplifier Vacuum Tube Power Amplifier (4x KT150 + 4x 6J8P)
- 3 Axis CNC USB Card Mach3 200KHz Breakout Board Interface for CNC Milling Machine Windows2000/XP/Vista
- FY8300S-20M 20MHz 4CH TTL Level Output 3-Channel DDS Function Arbitrary Waveform Signal Generator
- C4550A1-0213 Audio OCXO 10MHz External Clock Source Low Phase Noise Clock Oscillator For Professional Audio Equipment
- FY8300-30M 30MHz 4CH TTL Level Output 3-Channel DDS Function Arbitrary Waveform Signal Generator
- 5-35MHZ End Fed Half-Wave Antenna 100W PEP 1:49-49:1 Balun for HAM Radio
- ST-15B PLL FM Radio Broadcast Station 76MHz-113MHz 15W Stereo FM Broadcast Transmitter with BNC Interface
- ST-15B PLL FM Radio Broadcast Station Stereo 76MHz-108MHz 15W FM Broadcast Transmitter with BNC Interface
- ST-15B 76MHz-108MHz 15W FM Broadcast Transmitter Stereo PLL FM Radio Broadcast Station with TNC Interface
- CZE-15B Wireless Broadcast Radio 0.3-15W Adjustable Stereo FM Transmitter with PC Control + Power Adapter
- Assembled QRP-40 MINI 7x7 40W Antenna Automatic Tuner with 0.96\" OLED Display&Shell
- 1500W 220V Input Dual DC Output 45V/50V/55V/60V/65V/70V/75V80V Hifi Amplifier Power Supply Board LLC Soft Switching Power Supply
- 1000W 220V Input Dual DC Output 24V/36V/48V/60V/70V/80V Hifi Amplifier Power Supply Board LLC Soft Switching Power Supply
- 2000W 220V Input Dual DC 36V/60V/70V/80V Output Hifi Amplifier Power Supply Board LLC Soft Switching Power Supply
- 600W Dual Voltage Output 30V/35V/40V/45V/50V/55V/60V/65V/70V/75V/80V LLC Switching Power Supply Board For Power Amplifier
- 600W Single Output 24V/30V/36V/50V Optional Voltage LLC Power Amplifier Switching Power Supply Board
- 700W Main Output Voltage 30V/35V/40V/45V/50V/55V/60V/65V/70V/75V/80V LLC Switching Power Supply Board For Power Amplifiers
- 2000W 80V High Quality HIFI Amplifier PSU Board LLC Soft Switching Power Supply
- 3000W 50V/55V/60V/65V/70V/75V/80V/85V/90V Output LLC Amplifier Switching Power Supply Amplifier Power Supply Board
- 1000W Output 35V/40V/45V/50V/55V/60V/65V/70V/75V/80V LLC Soft Switching Power Supply Module Amplifier Switching Power Supply
- 1500W Input AC200-240V LLC Soft Switch Power Supply Module Amplifier Switching Power Supply
- audio amplifier with hdmi input
- digital to analog audio converter
- hd video capture
- hdmi extender
- hdmi extender cat5e x1
- hdmi extender over cat6
- hdmi over coax extender
- hdmi recorder
- hdmi splitter
- humidity analog
- lp record player
- lp vinyl records
- record player wholesale
- vinyl record player
- turntable player
- record turntable