Coal crucible furnace occupies a small area, operates stably and heats up quickly

All aspects of coke crucible furnace structure: introduction to the internal structure and filtration principle of bag filter: I. filtration principle of bag filter: the ash cleaning system of bag filter is an important device determined by its dust removal efficiency. Its filtration principle is mainly completed by filter bag and ash cleaning device. The structural design of ash cleaning device system of bag filter is mainly_ It is composed of several structural parts, such as pulse valve, injection pipe, air storage bag, deflector and controller.

Here, the working principle of bag filter is the above air inlet positive pressure operation process (: the dusty gas enters the gas distribution chamber from the air inlet and evenly enters each filter bag and carries out the dust filtering operation through the screening, inertia, adhesion, dispersion and static electricity of the filter bag. Due to the continuous existence of the dust initial layer formed on the filter cloth of the dust remover, the above effects are particularly obvious, so the dust removal power is very high. The clean gas after purification is discharged from the outlet. It is waiting to adhere to. And What is building curtain wall aluminum veneer Yuanba building materials & M integrated aluminum gusset plate? Where is the manufacturer dash; Material and structure of aluminum veneer of building curtain wall: aluminum veneer is divided into two types in terms of specifications: aluminum veneer with thickness less than 1.2mm is called aluminum gusset plate (also known as aluminum square plate), and aluminum veneer with thickness more than 1.5mm is called aluminum veneer. Aluminum veneer curtain wall adopts aluminum alloy plate with excellent height, with common thickness of 1.5, 2.0, 2.5 and 3.0mm, model of 3003 and state of H24. Its structure is mainly composed of panel, stiffener and corner code. The corner code can be directly bent and stamped by the panel, or riveted on the small side of the panel. The stiffener is connected with the electric welding screw behind the plate surface (the screw is directly welded on the back of the plate surface) to make it a solid whole and greatly enhance the strength of the aluminum veneer curtain wall.

Crucible furnace is a simple melting equipment, which is mainly used to melt non-ferrous metals with low melting point, such as copper, aluminum and their alloys. In this furnace, the alloy is melted in the crucible, and the heat is transmitted to the charge through the crucible. The combustion products of the charge are not in direct contact. Therefore, the chemical composition of the alloy is hardly affected by the furnace gas, and the temperature of the alloy liquid is relatively uniform, which is its main advantage. Its disadvantages are low thermal efficiency, high fuel consumption, small crucible capacity and poor working conditions.

Crucible furnace has always been the equipment for smelting copper alloy. At present, a large proportion of crucible furnaces are used for smelting copper alloys. The heat source of smelting was charcoal in ancient times, but now it is heavy oil, gas, electricity and coke. In order to save energy, protect the environment and improve efficiency, some heat sources are also changed from heavy oil to gas and some to induction furnace.