Polymer Cable Tray Frp Grp Cable Tray Hot-Dip Cable Tray Galvanized Cable Tray Suppliers

Frp Cable Bracket Description

Polymer cable tray is a new type of material tray product. It is suitable for petroleum, chemical, textile, electric power, machinery, transportation, civil construction and other fields. It can replace the current traditional metal tray. This polymer tray is in the United States Developed countries such as Japan, Germany, etc. have already been well applied. The polymer cable tray is made of high-tech polymer materials PVC and ABS polyphenylene oxide and other organic materials. It has strong heat resistance, low thermal expansion coefficient, good flame retardancy, high insulation performance, and strong corrosion resistance. Advantages such as long service life.

Selection of cable tray types and varieties:

1. When the cable network that needs to be shielded from electrical interference or protection from external influences (such as corrosive liquids, flammable dust, etc.) is required, the (FB) type trough type composite anti-corrosion shielded cable tray (with cover) should be selected Or polymer cable tray.

2. In a strong corrosive environment, the (F) type composite epoxy resin anticorrosive and flame retardant FRP cable tray should be used. Support arms and brackets should also be made of the same materials to increase the service life of the bridge and accessories, and the cable bridge. It is advisable to add a cover plate in the environment where dust is easy to accumulate and other needs to be covered or outdoor places.

3. In addition to the above conditions, tray type, trough type, step type, glass anticorrosive and flame retardant cable tray or steel ordinary type cable tray can be selected according to the on-site environment and technical requirements. It is advisable to add a cover plate in the environment where dust is easy to accumulate and other needs to be covered or outdoor places.

4. In public passages or outdoor sections of roads, pads should be added to the bottom of the bottom steps or pallets should be used in this section. When large spans span public passages, the load capacity of the bridge frame can be increased or the line frame can be selected according to user requirements.

5. For large spans (>3m), a composite bridge (FB) should be used.

6. The composite epoxy resin bridge (F) should be used outdoors.

If you have any questions, please contact us to arrange industry experts to answer any questions for you!