5T FLAT WEBBING SLING

5T FLAT WEBBING SLING are made from high tenacity 100% polyester (PES) webbing material manufactured according to EN standards. These slings have the following advantages:

* It can be divided into single layer or multi-layer, and the sewing method is various.
* Size can be determined by the customer's request.
* The bearing surface is wide, which can reduce the pressure of the surface load.
* When lifting objects with smooth and fine outer surfaces, it will not hurt the objects to be lifted.

Advice

1.Flat webbing slings should be applied in such a way,that the carry the load over the full sling width.

2.Loads may only be placed on slings if damage is precluded.Do not drag slings fromunder load, position the sling correctly to ensureeasy removal after use.

3.Position slings in such a way, that they hold the load securely.

4.In “chokef” lifts,only use flat webbing sling with rein forced eyes.

5.Using flat webbing slings with eyes, the eye opening angle should not exceed 20。at the connectingpoint.