|Place of Origin:||China|
YZR series motors are hoisting metallurgy special winding slip ring AC motors. This type of motor has high overload capacity and mechanical strength. It is suitable for short-term or intermittent periodic working system, frequent starting, braking, and significant Vibration and impact equipment used.
YZR 415V slip ring motor power class and installation dimensions are in line with IEC recommendations. The interchange of power class and installation size is similar to JEM1202 in Japan and DIN42681 in Germany, most of which are interchangeable.
The YZR winding slip ring motor has a good seal. The motor protection class for general locations is IP44 and the motor protection rating for metallurgical sites is IP54.
YZR series lifting metallurgy winding slip ring AC motor, suitable for motor lifting of large equipment. This model of motor installation size and power level are in line with IEC standards. The motor has high overload capacity and mechanical strength, and is especially suitable for short-term or intermittent operation, frequent starting, braking and equipment with significant vibration and impact.
The insulation grade of the motor is divided into two grades, F and H. Class F is suitable for general locations where the temperature of the cooling medium does not exceed 40 ° C; Class H is suitable for metallurgical sites where the temperature of the cooling medium does not exceed 60 ° C. Both motors have the same parameters. The metallurgical motor housing is rated IP54; the lifting motor housing is IP44. The metallurgical motor has an insulation rating of Class H and a lifting motor with Class F insulation. The motor stator junction box is located on the top of the base and can be wired from either side of the base. The motor is driven by a coupling or a gear. When the spur gear is used, the pitch diameter of the gear should be not less than twice the diameter of the shaft. Motor cooling method is IC0041 for frame number 112-132, IC0141 for frame number 160-355, and IC0151 for frame number 400.
Frame number: 112-400
Power range: 1.8KW-270KW
Protection level: IP44/IP54
Cooling method: IC0041/IC0141/IC0151
Working system: S2/S3/S4/S5
Insulation class: F, H class
The motor can operate normally under the following conditions
(1) Indoor dusty places
(2) Class F insulation is used in general environment, the ambient air temperature is not more than +40 °C, Class H insulation is used in metallurgical environment, and the ambient air temperature is not more than +60 °C.
(3) The altitude does not exceed 1000m
(4) Equipment with significant vibration and shock
(5) frequent starting, braking and reversing
Feature of Product
YZR winding slip ring motor is suitable for lifting metallurgical related mechanical equipment. The motor has high overload capacity and mechanical strength. It is suitable for short-term or intermittent periodic working system, frequent starting, braking, and significant vibration. With impact equipment.
This type of motor casing has a high strength cast iron casing, the motor junction box is located at the top of the motor, the motor fan is a good performance cast aluminum fan, and the motor slip ring uses a high quality copper slip ring.
The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.
Main Process Flow of the Motor
Motor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storage
Shijiazhuang ZCL Electric Motor Technology Co., Ltd. is a company mainly engaged in the manufacture, research and development and sales of motor products. The company has many types of motor products, including IEC standard motors. It is a professional IEC motor manufacturer. Related motor products have passed the product certification in China, the United States, Canada, Europe, the Middle East and other regions, and the products are exported to all over the world. Companies adhere to the "focus on products, service" business philosophy, is committed to improving the quality of safe motor products and services for customers around the world.
- ZCL Electric Motor Technology Co., Ltd.
- ContactTian Zhaofeng
- AddressZhangjiazhuang Town Motor Industrial Park Gaocheng District Shijiazhuang,Hebei
|Low Voltage Squirrel Cage Motors||Low Voltage Slip Ring Motors||Medium/High Voltage Squirrel Cage Motors||High Voltage Slip Ring Induction Motor|
|Large Synchronous Motors||Permanent Magnet Synchronous Motor||Explosion-proof Motors|
- poclain motor
- linear shaft motor
- yamaha outboard cdi
- aero motor
- air motor manufacturers
- axial piston motors
- boing motor
- brake lever mechanism
- cyclone motor
- dc geared motor with encoder
- electric vehicle three wheel
- electronic bike motor
- hopper vibrator
- hand brake mechanism
- hydrualic motor
- lcd tv lift