Support Position Control Mitsubishi Servo Amplifier MR-J4-200B

Brand: Mitsubishi
Product Name: servo drive model: mr-j4-200b1 axis servo amplifier.
Mitsubishi universal AC servo amplifier melcervo-j4 series. Rated output:
2.0kw. Interface: sscnet Ⅲ / h power supply: three-phase ac200v.
The same service amplifier supporting sscneti / h.
A fully synchronous system using high-speed serial optical communication can be
established.
It can be combined with servo system controller to maximize the functional
performance of servo system. At the same time, it can support the anti-seismic
algorithm at 3 places of inertia equipment. Mr configurator2 enables easy
adjustment.
The low-frequency aftershock effect below 100Hz produced by the front end of
the boom or the main body of the device is effectively. It can effectively
shorten the time required for aftershock control.
The accuracy of arc trajectory can be improved in the trajectory control of XY
slide.
At the same time, it can help to control the quadrant real up phenomenon caused
by the rotation direction of the same service application machine due to rate
friction and distortion.
Servo motor series: medium inertia, small capacity. Rated output: 4.2kW.
Rated speed: 1000r / min. electromagnetic braking: without. Power supply: 200V.
Realize the stable driving of medium capacity and medium inertia products.
Mitsubishi mr-j4-200b realizes the small total length in the industry through
optimized structural design.
High speed & high torque, shorten positioning time, realize high-speed
equipment and reduce Tongshen torque ripple.
By optimizing the combination of motor poles and slots, Tongshen torque ripple
is greatly reduced. Further realize the smooth and constant speed operation of
the equipment mr-j4-200b
To improve the environmental resistance, hg-sr and hg-jr series products adopt
IP67. Motor series: low inertia and medium capacity. Rated output power:
37.0kw. Rated speed: 2000rom
With or without holding room: without Mitsubishi mr-j4-200b Voltage: 400V
level. Shaft end: straight shaft.
Brushless motor has the advantages of small volume, light weight, large output,
fast response, high speed, small inertia, smooth rotation, stable torque,
complex control, easy to realize intellectualization, flexible electronic
commutation mode, square wave commutation or bottom chord wave commutation. The
motor is maintenance free, with high efficiency, low operating temperature, low
electromagnetic radiation and long service life. It can be used in various
environments. AC servo motor is also a brushless motor, which is divided into
synchronous motor and asynchronous motor. At present, synchronous motor is
generally used in motion control. It has a large power range and can achieve
great power Mitsubishi mr-j4-200b.
Large inertia, high rotational speed, low, and rapidly decreases with the
increase of power. Therefore, it is suitable for the application of low-speed
and smooth operation, driving unit= Mitsubishi universal AC servo amplifier
melcervo-j4 series. Rated output: 37KW three ginger servo driver. Interface:
universal.
Power supply: three-phase AC400V.
Special specification: totally enclosed control 4-wire / support mechanical end
encoder ABZ phase input / support positioning mode. Support position control,
speed control and torque control. The position control follows the position
command for positioning.
When using synchronization control and insertion control, perform position
control
Speed control follows the speed command to control the speed within a certain
range,
Torque control is to follow the torque command to control the stable torque
servo driver. Switchable function. It can switch the increase during rotation
and stop,
The switching signal is used to switch the amplitude during operation. Servo
motor series: medium inertia, medium power. Rated output: 2.0kw.
Rated speed: 2000r / min,
Electromagnetic brake: with Mitsubishi servo driver. Shaft end specification:
Standard (straight shaft).
Features: medium inertia has two types: low speed and high speed, which are
suitable for different applications. IP rating: IP67. Application example:
1. Material conveying system.
2. Industrial robots.
3. X-Y workbench.
The protection grade of hf-sp / hf-jp series motor in the same suit is IP67
(excluding the shaft through part). The motor capacity is soft (mrzjw3-
motsz111e)
Friendly interface design, just input the constant and operation mode in the
mechanical description window to select Jiajia servo amplifier. Servo motor and
regenerative braking options. You can also select the features of linear servo
motor and direct drive motor mr-j4-200b in the selection window
(1) 10 kinds of curved mechanical transmission structures are available
(2) The user-defined operation mode (position and speed control mode) can be
set. (3) in the selection process, the feed speed and torque can be displayed
in chart format. (4) the calculation process can be displayed