Heat Treatment Oil Automatic Brightness Tester

Heat Treatment Oil Automatic Brightness Tester

Product Model: Jf0564

Product Introduction

The instrument adopts the products of automatic control of electrical appliances, which makes the operation easier and reduces the manual procedures of the operator, thus ensuring the accuracy of the results. The machine consists of a host, a release system, a heating furnace, and a stirring system. The user only needs to put the sample into the test cup and press the "power" button on the instrument, and the instrument will automatically measure.

Technical Parameter

1. Applicable standard: SH/T0564

2. Heating method: electric furnace wire heating

3. Temperature control range: normal temperature~1000℃

4. Temperature control method: digital display PID automatic temperature control

5. Temperature control accuracy: 5‰

6. Nitrogen purity: 99.99%

7. Residual oxygen: ≤0.1PPM

8. Hydrogen production rate: 210ml/min

9. Hydrogen pressure: 0～0.6Mpa

10. Working environment: Humidity: 0~45oC

Relative humidity: ≤ 80%

11. Working power supply: AC220V±10%/50HZ

12. Power of the whole machine: 2KW

13. Weight of the whole machine: 40Kg

Main Feature

1. The time relay controls the drop of the test block without manual operation.

2. The shell of the instrument is made of cold-rolled steel plate, and the surface is treated by electrostatic spraying and high temperature baking, which is easy to clean and corrosion-resistant.

3. The high temperature furnace adopts the electric heating wire imported from Switzerland as the heating element, with uniform temperature and long service life

4. The furnace adopts 8-hole circulating heating tank, which avoids the disadvantage that the heating wire is easy to burn.

5. The furnace body is made of stainless steel.

6. Double gas source to minimize residual oxygen in the furnace body.

7. The furnace connection adopts standard slide rail, which is slidable and easy to maintain.

8. There is an anti-signal interference slot in the inner hole of the furnace to avoid electromagnetic interference during the test process, which will cause the block to be blocked when the test block falls.

9. The test temperature of the standard probe meets the experimental standard.

10. The standard test block is automatically released without manual intervention.

11. When the temperature of the furnace body reaches the set value, the microcomputer will prompt and test automatically.

12. High-precision flowmeter controls the gas source.

13. Dual cooling circulation system.