Haidike Fiberglass Orthopedic Casting Tape Bandage China Factory Price

1. First, put a cotton cover on the fixed part and wrap the cotton.
2. The doctor brings medical gloves.
3. Select the appropriate size bandage to open the package.
4. Soak the bandage at room temperature (21~24°C) for about 4~6 seconds and squeeze it 2~3 times. After taking out, squeeze out too much water. The curing time of the bandage is directly related to the water temperature, the water temperature is high, the curing time is short, and the water temperature is low and the curing time is long. If the water temperature exceeds 27 ° C, the curing time will be shorter.
5. The bandage in the affected part spirally wrapped, wrapped around 1/2~2/3, the tightness of the winding should be moderate, if too loose will weaken the adhesive force of the bandage, too tight will affect the blood circulation of the affected part.
6. The strength of the bandage is related to the number of overlapping layers. According to the actual needs, the non-bearing parts overlap with 3~4 layers, and the load-bearing parts overlap 5~6 layers.
7. When it is necessary to increase the product, it is necessary to ensure the adhesion between the layers of the product. In order to increase the adhesion between the layers of the bandage, the bandage is shaped after winding. The operation time is usually 3~5 minutes. If it is soaked or the operation time is too long, it will affect its adhesion and shaping effect, so it needs to be shaped within the operation time. Within 10 minutes before the product is completely hardened, the affected part cannot move freely.
8. shaping is completed.