SJ5500-600 universal thread measuring machines for plug gauges

 SJ5500-600 universal thread measuring machines for plug gauges 

1. Full-automatic measurement for comprehensive parameters of cylindrical thread plug gauges, cylindrical thread ring gauges, taper thread plug gauges, taper thread ring gauges, plain ring gauges, plain plug gauges and other gauges with internal & external dimensions, including virtual pitch diameter , single pitch diameter, basic pitch diameter, major diameter, minor diameter, thread pitch, thread angle, half of thread angle, flank straightness, lead angle, taper, etc.

2. Can measure trapezoidal thread, buttress thread, sawtooth thread and other large-slope thread, as well as ordinary thread.

3. Can measure comprehensive parameters of single thread and multiple thread 

4. Measure various thread gauges according to GB, ISO, BS, ANSI, DIN, JIS standards. With comprehensive and professional thread standards in database, it meets requirements of most customers.

5. Automatically generate test results according to relevant regulations and standards.

6. After one time measurement, the software can records various parameters of thread and display data of any position, in addition it generates the thread curve, relevant parameters and analysis chart automatically.

7. Measuring probe and workholder are identified automatically, which avoids collision of measuring probe caused by operating errors. 

 

Item No.	SJ5500-200	SJ5500-300	SJ5500-400	SJ5500-500	SJ5500-600
Outside measuring range	(1.0-250)mm	(1.0-350)mm	(1.0-450)mm	(1.0-550)mm	(1.0-620)mm
Inside measuring range	(2.5-250)mm	(2.5-350)mm	(2.5-450)mm	(2.5-550)mm	(2.5-620)mm
Max measuring length	250mm
Min thread pitch	0.1mm
Weight	2000kg
Dimension	200×90×91cm
Measuring uncertainty:
Cylindrical or Taper ring gauge(Mimor diameter >2.5mm, half of thread  angle ≥27°)
Minor diameter(μm)	3.0 + L/200
Pitch diameter(μm)	3.0 + L/200
Thread pitch(μm)	0.8 + L/200
Cylindrical or Taper plug gauge (Major diameter >1.0mm, half of thread  angle ≥27°)
Major diameter(μm)	2.9 + L/200
Pitch diameter(μm)	2.9 + L/200
Thread pitch(μm)	0.8 + L/200
Plain ring or plug gauge(μm)	2.0 + L/200
Other measurement(μm)	2.0 + L/200
Contour measurement
Outside measuring range	(0-250)mm	(0-350)mm	(0-450)mm	(0-550)mm	(0-620)mm
Inside measuring range	(2.5-250)mm	(2.5-350)mm	(2.5-450)mm	(2.5-550)mm	(2.5-620)mm
Resolution of X-axis and Y-axis	0.01μm
Accuracy of X-axis	±(1.5+L/100)μm
Accuracy of Z-axis	±(1.5+L/100)μm
Max gradient	75°(T-shaped measuring probe)
Measuring force	(40-150)mN
Measuring speed	(0.01-2)mm/s

 

 

SJ5500 achieves full-automated and precision measurement of comprehensive thread parameters by using Heidenhain precision linear encoder system, precision air bearing drive system, imported servo motor control system, high performance industrial computer control system and large capacity memory technology. After driving the measuring probe to contact with workpiece by precision air bearing system, the software records the horizontal and vertical coordinates in measuring process by applying Heidenhain precision linear encoder system, then, on the basis of synthesizing the two-dimensional measuring values , the software calculates and obtains a variety of thread parameters according to relevant definitions.

 

SJ5500 is a full-automated measuring machine. The operator only needs to install the thread, select matching standard and input relevant sizes & measuring range & other parameters in software, then the system measures automatically after click the "start" button. The software displays real-time tooth profile curve of thread and calculate the major diameter, pitch diameter, minor diameter, thread pitch, thread angle, other thread parameters automatically. Finally the system qualifies a variety of thread parameters according to built-in thread standards, and test result is generated automatically. The whole process is completed in 2 min.

 

1. Full-automated measurement

Without human intervention, the machine implements measurement and evaluation of all thread parameters in 4 min, finally displays all measuring parameters. According to built-in thread standards, the system generates the test report automatically. That significantly simplifies the operator's work as well as improves the measuring efficiency, quality and accuracy.

 

2. Unilateral or bilateral measurement of contour

The machine measures and inspects contour, two-dimensional dimension, two-dimensional displacement of the workpiece, and surface contour curve is described directly. On the basis of measured contour data, the software calculates and obtains dimensions, form & location tolerance and other parameters rapidly. The test result is reliable and operation is simple & easy. With both thread measurement and contour measurement SJ5500 is high cost-performance.

 

3. High accuracy, high stability and high repeatability

 

4. SmartTouch intelligent measuring technology (Patent No.1)

By using real-time control device and intelligent sensing device for measuring force, the problem of abrasion of measuring pin is solved, particularly large-slope thread can be direct measured. The measuring force is adjustable from 0.1~10gf by real-time control device which can adjust measuring force accurately. Resolution of intelligent sensing device is up to 0.1gf, which can help to protect measuring pin very well.

 

5. Simple, humanized design

With quick workholders for thread and user-friendly software UI, without complex adjustment process and manual recording, the operator can be trained to use it within a few minutes. Operation of the machine is extremely simple.

 

6. 3D navigation function(Patent No.2)

3D navigation graphics of measuring probe, workholder and workpiece is built by applying 3D graphics technology, which realizes multi-angle display in real-time, consequently, probability of collision of measuring probe is minimized. The operating convenience, accuracy, safety and reliability are improved greatly.

 

7. Convenient and accurate replacement of measuring pin(Patent No.3)

In the innovative structure for installation of measuring probe, the probe holder is fixed vertically(the probe holder aligns cross section of thread). This structure eliminates errors caused by repeated installation, so the repeatability is excellent.

8. Precision vibration isolation system

Avoid external vibration interference by using imported precision vibration isolation system, which lays the foundation for precision measurement.

 

9. Accurate & sensitive measuring force system

 

Automatic control by computer in both directions. Measuring force range: 0.01 ~ 0.07N, that is far less than 0.14N of the similar machines. The micro measuring force protects measuring pin from abrasion, so life of measuring probe is infinite, in addition workpieces are protected as well. The micro measuring force greatly helps to achieve measurements for large-slope threads as well as precision measurements for the ordinary threads.

 

 

 

 

 

Standard configuration

1. SJ5500 host machine

2. Workholders

3. Jacking fixture

3. Measuring pins group

4. Standard thread gauges

5. Standard plain ring gauges

6. Standard plain plug gauges

7. Built-in regulations and standards

8. Testing software

9. Computer

10. HP color laser printer

11. Aluminum alloy box for accessories

12. User manual

13. Product certification and warranty card

 

Optional configuration

1. Software module for trapezoidal thread measurement

3. Measuring pins for trapezoidal thread measurement

4. Software module for profile measurement

5. Measuring tips with spherical face

6. Other workholders

7. Water-free, oil-free, silent air supply system

8. Electronic moisture-proof case    

 

 

CHOTEST is not only a software company but also a national high-tech enterprise integrating research, development, production and sales, which is specialized in designing and producing precision measurement instruments and calibration instruments.

 

The company has 2,000 square meters of modern office well equipped with advanced research facilities. In addition, it owns 5,000 square meters of precision machining and assembly factory. All products are manufactured in accordance with ISO9001 standard. The company is always living up to the motto that is providing our customers with top quality products.

 

At present, the company has dozens of self-developed products with new technology, widely used in government Metrology and Quality Inspection agencies, international military, automotive, aerospace, machinery, metallurgy, electric power, petrochemical and other industries. The company also has involved in developing a number of national standards and has made its due contribution for China's metrology and testing technology progress.

 

CHOTEST focuses on technology development of precision measurement equipments and sophisticated testing equipments. It constantly challenges to all kinds of technical barriers and technology monopoly. The goal of the company is to provide high-end measuring equipments to manufacturing industry in all over the world.

 

Contact Us:  chk(at)          Skype: crane_ck

 

1. Are you factory?

Yes, we are specialized in designing and producing precision measurement instruments and calibration instruments.

2. How many years experience do you have?

We have 16 years experience on measurement instruments and calibration instruments since 2002.

 

3. What size of your factory?

We have 5000 square meters of factory and 2,000 square meters of modern office

  

4. Can you accept OEM and ODM?

No, we only sell the products under Chotest brand.

 

5. Can I become your distributor?

Yes, please contact our sales engineer.

 

6. What is the lead time?

Lead time is 30-60days in usual.

 

7. What is your payment term?

30% deposit first, balance payment before delivery. 

We accept T/T, L/C.

 

8. How to install the machine?

We dispatch our engineers to install and debug the machine in site of the customer.

 

9. What is your warranty term?

We provide 1 year warranty after acceptance inspection by customer.

Free repair or replacement in 1 year warranty in case of any problem.

Response in 12 hours for emails or calls from customers in working days.

...