Plastic Geomembrane Film Hot Wedge Climbing Welder

Plastic Geomembrane Film Hot Wedge Climbing Welder

     CL900 series geomembrane welding machine with a display controller is small, light, high welding efficient. Which can weld geomembrane of various thickness and are applicable for welding of all thermal-fused material such as LDPE, PVC, HDPE, EVA, PP and so on

    This series of welding machine is excellent in performance and easy for operating, with high welding speed and good work quality. It is extensively used in engineering projects such as expressways, tunnels, reservoirs, waterproof of construction and so on .

Operation principle

Motor drives upper and lower pressure rollers to rotate through reduction gearbox and chain . Slide carriages drive the hot wedge and insert it between the two base materials , at the same time lever presses pressure rollers and engages the two fused base material

Technical data

Precautions

1.Use with grounded 3 cords mains cable and socket , plug will not be modified without prior permission

2.For good welding quality , please assign specified personnel for operation

3.Pressure roller will not engage on free running

4.Do not operate when it is exposed to water to prevent inferior quality

5.The machine has been regulated before leaving factory . Please don’t adjust it at all .

6.Preheat for 30 minutes before start up .

Supplied Accessories

1. Hot wedge

2. Steel pressure wheel

3. Temperature controller

4. Relay