Home > Products > Reinforcement Sleeve > Hot selling Steel Bar Cold Extrusion Sleeve
Hot selling Steel Bar Cold Extrusion Sleeve
- 100000 Piece / Pieces per Month
- mould ,plastic mould. injection mould ,plastic injection
- plastic , plastic product, plastic injection, plastic accessory, plastic part.
- aluminium and zinc hardware sliding Windows lock for OEM
- zamak windows bolt Windows latch for OEM
- Zinc windows latch aluminium Window latch for OEM
- aluminium zamak Windows lock for OEM
Product Description
There are six types of reinforcement sleeve connection: (variable diameter type and flared type are not introduced here)
1. Standard connection
Possible free rotation of the application. The use of iron bars causes each other to lock the end forces of the bridge segments opposite each other. Choose standard sleeve or variable diameter connecting sleeve.
2. Extended connection
It is used where the reinforcement is too long and dense to rotate. The connecting sleeve shall be screwed into the extended thread of one reinforcement in advance, and then the end thread of the connected reinforcement shall be screwed reversely. The connector can be locked by rotating the reinforcement for half to one turn. The standard connecting sleeve can be selected.
3. Lock female connection
It is used for the mutual docking of bending reinforcement, bridge, cast-in-place pile and other reinforcement cages. Screw the lock nut and the connecting sleeve into the extended thread in advance, then screw in another rebar end thread, and lock the connecting sleeve with the lock nut. Standard or flared connecting sleeve with lock nut can be selected
4. Positive and negative screw connection
It is used where the reinforcement cannot rotate at all and the internal force of the reinforcement needs to be adjusted, such as construction joint, post cast strip, etc. The connecting sleeve is provided with positive and negative screw threads, and two rebars can be loosened or tightened in one screwing direction. The connecting sleeve with positive and negative screw threads shall be used first.
Rib stripping and rolling straight thread connection of reinforcement is a new reinforcement connection sleeve technology. Its structural principle is to strip part of the longitudinal rib and transverse rib at the end of the reinforcement to be connected by cutting, and then roll it directly into ordinary straight thread, and then connect it with a special straight thread reinforcement connection sleeve to form the connection of reinforcement.
The advantages of this connection method are as follows:
Good mechanical properties and safe and reliable connection: due to the rolling forming of the end of the reinforcement and the cold work treatment of the reinforcement material, the strength of the thread and the reinforcement has been improved, which makes up for the impact of the weakening of the strength caused by the bottom diameter of the thread less than the diameter of the base circle of the reinforcement base metal, so that the strength of the connected joint is higher than that of the base metal, and the base metal can give full play to its strength and ductility.
Convenient connection: it can be operated flexibly at places with dense reinforcement arrangement in narrow and small sites. Convenient construction and high efficiency: the reinforcement connecting sleeve is prefabricated in the factory, with quality assurance: each set of on-site rolling wire head equipment can process nearly 400 joints per shift. It has incomparable advantages in the construction of large quantities and basement bottom plate. There is no pollution, open fire operation, good safety and environmental protection, and can be constructed all day.
Easy to detect: there is no need to use specific testing equipment during construction. The quality of the joint can be measured only by looking at the exposed wire teeth of the reinforcement. Strong applicability: it is applicable to the reinforcement connection of all seismic and non seismic reinforced concrete structure projects, and it is applicable to bending reinforcement, fixed reinforcement, reinforcement cage, super long reinforcement and other occasions that cannot rotate.
Contact Us
- Zaoqiang Jingang steel sleeve equipment factory
- Contact namezhangfengjun
Cold Extrusion Sleeve | Cooling tower packing | Steel Sleeve | Reinforcement Sleeve |
Rebar sleeve | Rolling Machine | Taper sleeve | Screw Sleeve |
Filter Press | Filter Plate |
- Pneumatic joint spring clip, gas pipeline joint switch clip, tracheal connector spring clip. SUS304 stainless steel material, durable and long-lasting.
- Component sealed casing, motor stretched casing. stainless steel stretching parts, electronic component shielding cover, sensor stretching shell.
- Potentiometer housing stretching parts, stainless steel stretching parts, electronic component shielding cover, sensor stretching shell.
- American standard plug, charger plug., American standard 23.3 * 6.25 * 1.45mm plug, H65 brass material, nickel plated, without burrs.
- Pneumatic quick connector spring clip, quick connector switch clip, tracheal connector spring clip. SUS304 stainless steel material, durable and long-lasting.
- Common mode inductor fixing clip. SUS301 material, product elasticity is very stable. We can develop molds according to the customer's design. Fast delivery time and good service.
- American standard plug, adapter switch plug, American standard 23.3 * 6.25 * 1.45mm plug, brass material, nickel plated, without burrs.
- European standard plug PIN, power adapter plug, brass plug, USB charger plug, brass material surface nickel, without burrs.
- Charger insert, power adapter insert, brass insert, USD charger insert, brass material surface nickel, without burrs.
- Brass connectors, brass terminals, H65 brass material, can be customized and produced according to customer requirements. Continuous mold production with precise dimensions.
- EP5 core cover, EP5 transformer clips, EP5 Inductive Shield Cover,SUS301 material,Inventory sales,fast delivery.
- BS3464_DN125_Cast_Iron_Gate_Valve_with_Square_Stem_Cap_for_T-Key_Handle_Operation
- Resilient gate valve DIN3352/F4 gate valve
- Large gate valve DIN3352 F4 Rising-stem gate valve
- DIN3352 F4 Rising-stem gate valve
- Metal Stamping Parts High Quality Hardware Parts Processing from China Supplier Factory Custom
- Metal Stamping Parts High precision Professional customization Machining Services for Appliance Industry
- Metal Stamping Parts Processing plant Excellent Material Precision Hardware Parts for the automotive industry
- High precision Metal Stamping Parts China Source Factory Stainless Steel Hardware Material Special-shaped Parts Professional Customization
- Brass connector insert, socket connection piece, small component metal stamping parts, customized metal stamping parts according to customer requirements. Phosphorus copper shrapnel.
- EP7 male and female clip, EP7 magnetic core fixing clip, SMD EP7 current transformer accessories, SK7 high carbon steel material, elastic stability.
- EP7 clamp EP7 transformer clip EP13 spring clamps,sk7 material,Inventory sales,fast delivery.
- Metal Stamping Parts for Irregular Parts High Efficiency Precision Punching Processing Factory Price
- Metal Stamping Parts Processing plant Excellent Material Precision Hardware Parts for the automotive industry
Popular Searches
Find Similar Products By Category
- Hardware > Other Hardware
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
zhangfengjun
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-