HYE-2000 micro-electro-hydraulic micro-electro-hydraulic testing machine

wooden case

 HYE - 2000 type microcomputer electro-hydraulic servo pressure testing machine is driven by the hydraulic power source, the electro-hydraulic servo control technology, computer data collection and processing, can realize the closed loop control and automatic detection of high-precision materials testing equipment, its by the test host, oil source (hydraulic power source), measurement and control system, test instruments of four parts, the largest 2000 kn test force, The accuracy grade of the testing machine is better than 1 level.

 HYE - 2000 type microcomputer electro-hydraulic servo pressure test function shall be carried out in accordance with the corresponding national standard loading rate set and meet the standard load rate control index of cement, concrete and other material rated experiment was carried out under the force of compressive strength, bending test, load, time and test curve of dynamic display and control function and the biggest test the force function in a timely manner.

The testing machine is the main engine oil source split structure; It is suitable FOR THE compression test of cement and concrete, and can meet the split tensile test, flexural test and static elastic modulus test of concrete with appropriate fixture and measuring device.

The testing machine and accessories comply with GB/T2611, GB/T17671, GB/T16826, GB/T50081 standard requirements.

 Product Characteristics

 testing machine host

The main machine for the four column space structure, the main body by the base, cylinder, pressure sensor, pressure plate, lead screw, light bar, worm gear and worm drive assembly, lifting motor, beam, etc., the machine rigidity is good, the test process is stable, easy to operate.

The electric screw rotates to adjust the compression space, easy to operate.

The design of the testing machine is beautiful, convenient and safe. For example, the high toughness protective net is configured above the platform to form an isolation between the test space and the operator, which can effectively ensure the safety of the operator. The surface of the bar is chrome-plated and polished, beautiful and rust-proof.

 Test engine oil source cabinet

The integrated oil source cabinet is composed of hydraulic pump station, oil source control, measurement and control system, computer and so on. The built-in axial plunger oil pump has stable output, low noise, high integration degree of oil source cabinet, small footprint, and convenient operation and observation.

The whole oil source system adopts servo closed-loop control, equipped with digital valve, Siemens motor with stable torque and speed, high precision valve plate set and other components, fast response, high sensitivity; The system monitors load, stress and other parameters in real time, with tracking, following, adjustable and other functional characteristics, can realize automatic and accurate control.

 Measurement and control system

The measuring and controlling system includes digital valve, high-precision sensor, controller and software, with high control accuracy and good reliability. Meet GB, ISO, ASTM standards for cement, mortar, concrete and other materials test requirements, and has the following functions: with force closed-loop control function; It can realize equal load rate loading or equal stress rate loading. Using microcomputer to realize electronic measurement, automatic completion of the test; The computer automatically calculates the results and prints the report; Supports serial port or Ethernet communication and provides a data interface for networking.

 Technical parameters of the product

Maximum test force: 2000kN;

Test machine level; Grade 1;

The relative error of the test force is within ±1%;

test force measurement range: 1%-100%FS (full range not divided);

Host structure: four-column frame type;

Compression space: 320mm;

Piston stroke: 50mm;

The speed of loading: 0.02%-2%FS/s;

Upper plate size: 240mm× 240mm;

The size of the lower plate: 350mm× 260mm;

Main body size: 700×430×1350 mm;

Overall dimension of control cabinet: 1200×600×850mm;

Level machine power: 2.0kW (pump motor 1.5kW);

Weight: about 1090kg;

 Product standard configuration

HYE-2000 microcomputer electro-hydraulic servo pressure testing machine main frame, a set of upper and lower pressure plate assembly;

A high precision pressure sensor;

Lenovo a commercial computer;

A brand ink jet printer;

A full digital closed-loop controller;

Special software for electro-hydraulic servo pressure test (Chinese version);

One oil source, including: digital valve, axial plunger oil pump, Siemens motor, pressure reducing valve, oil filter, card sleeve pipe connector, 304 stainless steel seamless steel pipe, galvanized oil tank, integrated strong electric control box.

A set of manuals, certificates and other materials;

 Product after-sales service

Our company solemnly promises to provide quality and perfect after-sales service in accordance with the following terms:

The interface for debugging. Our company's professional and technical personnel to assist the installation, commissioning, detailed introduction of equipment use, maintenance methods, matters needing attention.

Our company provides technical training for equipment operation and maintenance personnel to ensure that operators fully grasp the correct use of equipment.

The company's products implement "three guarantees of quality", quality guarantee period of two years, lifelong service. During the quality guarantee period, the company shall be responsible for the failure caused by defects in design, manufacture, process or materials, and repair and replace defective parts or whole machine free of charge. After the quality guarantee period, hardware replacement check cost costs, computer software upgrade free of charge for life.

Spare parts supply and service. Under THE CONDITION THAT THE USERS MAINTAIN AND USE THE EQUIPMENT AND PARTS correctly, our COMPANY WILL replace the parts with quality problems free OF charge during the warranty period, and provide the qualified spare parts required by the users at a long-term discount.

Our company will provide two copies of the following technical data (one copy within one week after the contract comes into effect, the other copy will be provided at random) : product installation instructions, operation instructions and packing list

The relevant electrical and civil materials shall be provided within three days after the contract comes into effect.

Other matters not covered herein shall be settled through negotiation separately.