Home > Products > Leveling agent > German technical background VOK-364 P leveling agent Used for anti-shrink holes in powder coatings replaces BYK-364 P
German technical background VOK-364 P leveling agent Used for anti-shrink holes in powder coatings replaces BYK-364 P
- 100000 Kilogram / Kilograms per Month
- Nansha port
- T/T
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Protecting Products
- SIlica Gel Desiccant Fine Pore for Drying Flowers Moisture Damage
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Suppliers
- Hengyuan OEM production regenerating silica gel desiccant
- silica gel absorbent capacity in bags moisture absorbent
- 10 grams silica gel in bags moisture absorbent
Product Details
Brand Name: | vok specialty chemistry | Place of Origin: | China | Model Number: | BYK-364 P、VOK-364 P |
Type: | Other, Leveling agent | Usage: | Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals |
Product Description
German technical background VOK-364 P leveling agent
VOK-364 P powdered polyacrylate surface additive for powder coatings, excellent anti-crater and leveling additive to increase pigment and substrate wetting.
Product information
Chemical composition
Polyacrylate adsorbed on silica
Typical physicochemical data
The data presented on this data page is typical and not a product specification.
Acrylate content: 60%
Density (20 °C): 1.32 g/ml
Residue after calcination: 37%
Purchase form: powder
Application areas
Powder coating
Features and benefits
VOK-364 P is an effective anti-crater adjunct. Reduce orange peel by optimizing the leveling properties of powder coatings. Prevents pinholes, fish eyes and other surface defects. The polar structure of the additive improves the wetting of pigments and substrates. Better DOI values (vividness) and less pinhole surfaces can be obtained, especially in powder coating systems replaced by TGIC. VOK-364 P is a hydroxyl active additive that can be incorporated into polymer compounds by reacting with a suitable resin.
Recommended Use
The additive is recommended for powder coatings based on epoxy, polyester, polyurethane, acrylate resins and polyester/epoxy hybrid resins.
Recommended dosage
0.5-2% additive dosage (purchased form) is based on total formulation.
The above recommended dosage is for reference, and the appropriate dosage needs to be determined through a series of tests.
Addition method and processing guidance
The additive is mixed with resins, curing agents, pigments and other raw materials in a high-speed mixer and then extruded. The additive is well dispersed by the extruder to improve the gloss and leveling of the powder coating and to prevent cratering, fisheyes and particle formation.
Contact Us
- Guangzhou Situyuan Chemical Co., Ltd
- Contact nameliaolijun
- Phone86-020-29863024
- AddressPanyu District Guangzhou,Guangdong
Defoamer | Leveling agent | Wetting dispersant | Wetting agent |
Other special additives |
- HAISU MAX 96-well Plate, 5 mg Sorbent per Well,Detachable , 30 µm, 2/pk
- HAISU MAX 96-well Plate, 2 mg Sorbent per Well,Detachable , 30 µm, 2/pk
- HAISU MAX 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MAX 96-well Plate, 60 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 20 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB-2 96-well Plate, 5 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB-2 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 20 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 5 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, Detachable 5 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, Detachable 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 3 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU Silica SPE Cartridges, Silica, 40 - 63 µm, 60 Å
- HAISU Silica gel high-purity grade, pore size 60 Å, 70-230 mesh particle size, 63-200 μm particle size, for flash chromatography
- HAISU Silica gel high-purity grade, pore size 60 Å, 230-400 mesh particle size, 40-63 μm particle size, for flash chromatography
- Absorbent paper for flower pressing A4 A5
- Zeolite 4A molecular sieves for liquid coats and paints deep dehydrating
Popular Searches
- caustic soda flake
- sodium hydroxide
- caustic soda
- chelate agent
- Activated Carbon
- activated charcoal
- active carbon
- anthracite filter media
- Granular Activated Carbon
- Coconut Shell Activated Carbon
- Powder Activated Carbon
- Nut Shell Activated Carbon
- Honeycomb Activated Carbon
- Coal Activated Carbon
- Wood Activated Carbon
- Activated Charcoal Carbon
Find Similar Products By Category
- Chemicals > Catalysts & Chemical Auxiliary Agents > Chemical Auxiliary Agent
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
liaolijun
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-