GB 8410(Chinese Standard) Flammability Test to Motor Vehicle

The flame retardant performance of automobile interior is directly related to the safety of the whole vehicle. International regulations and related standards have made clear provisions on the combustion performance of interior materials.The flammability of automotive interior materials is usually evaluated by measuring the maximum combustion rate with horizontal method.At present, the international assessment and testing standards include German DIN 75200, American federal regulation FMVSS302, European Parliament and Council Directive 95/28/EC, etc.China has GB 8410 mandatory standard, which stipulates the evaluation index of combustion characteristics of interior decoration materials.

This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials.

This Standard applies to the assessment of automotive interior materials.

As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials.

GB8410 - Technical requirements：

The flammability of interior materials must meet the following technical requirement:

The burning rate is not greater than 100 mm/min.

GB 8410 - Test method：

Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance.

GB 8410 - Relative Standard:

FMVSS 302 Flammability of Interior materials

SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method

TL1010: Flammability

ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials

DIN 75200:Determination of burning behaviour of interior materials in motor vehicles

95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehicles”, and is intended to ensure that they meet fire safety standards

NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.

U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles

BMW N 60121.0: BMW standard

DBL 5307: Benz Standard

GM L-T06-302G-79: GE Standard

Mitsubishi ES-X60410: Oxygen Index

VW TL 1010: burning behaviour

Volvo STD 5031: burning behaviour

CASfire Technical Co.,Ltd  have rich experience to provide GB8 410 Flammability of automotive interior materials.

CASfire Technical Co.,Ltd

8F Building 4, Chinese Academy of Science,

No.255 South Duiying Road,Jimei, Xiamen 361021, China

Tel: (+86) 0592-3500085

MP: (+86) 18906059211 

Email: info@casfire.cn

Website:

From JJ2022