Schneider-140AII33000C

Product Description

• Manufacturer : Schneider Electric

• Product No. :140AII33000C

• Product type : Analog Input Module

• Type of filter : Single pole low pass - 3 dB at 15 Hz +/- 20 %

• Analogue input number : 8

• Input type : Differential

• Addressing requirement : 9 input words

• Analogue input resolution : 12 bits

• Linear measuring range : 1...5 V 4...20 mA

• Input impedance : > 20 MOhm voltage 250 Ohm current +/- 0.01 %

• Linearity error : +/- 0.04 %

• Common mode rejection : > -72 dB 60 Hz

• Isolation between channels : 30 V DC

• Update time : 5 ms

• Fault type : Broken wire 4...20 mA Undervoltage range 1...5 V

• Bus current requirement : 240 mA

• Power dissipation in W : 2 W

• Ambient air temperature for operation : 0...60 °C

• Ambient air temperature for storage : -40...85 °C

• Weight : 0.3 Kg

• Shipping Weight : 1.5 Kg

The Modicon 140-ACI-030-00 is an Quantum Analog Input 8 Channel Unipolar Module with 8 differential inputs. It accepts mixed current and voltage inputs. Each input has an LED indicator. If these are green, then the indicated point or channel is turned on. If these are red, then there is a detected error on the indicated point or channel. If the “Active” LED is green then Bus communication is present. If the “F” LED is on and red, then an error external to the module has been detected. It is important to note that this module produces an “F” error signal if any of the channels detects a broken wire condition in the 4 to 20 mA range or if there is an undervoltage condition in the 1-5 Volt range. Unused inputs may also cause an activation of the “F” error LED. To avoid this, wire unused channels in voltage mode to one that is in use. Unwired inputs can cause invalid readings; when configured for voltage inputs, and no jumper is installed between the INPUT(+) and ISENSE terminals, a broken field wire can occur. If this happens, the readings will be non-zero and not predictable. The field wiring terminal strip should not be removed when the module is operating, as this can cause injury or equipment damage.

The Schneider Electric 140ACI03000 has an addressing requirement of 9 input words. Its absolute maximum input is 25 mA and 50V DC. The isolation between the module’s channels and the Bus is 1000 Vdc or 3000 Vdc at 60 s. The isolation between its channels is 30 Vdc. The current requirement for the Bus is 240 mA. The ambient temperature  for module operation should be between 0 to 60 °C, and its ambient temperature for storage is -40 to 85 °C. When using Concept or ProWORX software, the 140ACI03000 requires 9 contiguous input registers. There are no Module Zoom selections required for this module. The module is HART compatible.

Main products: DCS distributed control system, PLC programmable controller, CNC system

(CPU processor, module, card, controller, servo drive, workstation, driver

Motors, memory cards, power supplies, robot spare parts, etc.)

Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

Price description

Price: the display price of the goods. The specific transaction price may change due to the participation of the goods in activities, or it may change with the purchase quantity or the selected specifications. If the user and the merchant reach an agreement offline, the settlement price agreed offline shall prevail, such as the user

When online purchase is completed, the price on the order settlement page shall prevail.

Flash sale price: the price of the product participating in the marketing activities may also change with the purchase quantity or the selected specifications, and the price on the order settlement page shall prevail.

Special tips: The flash sale price and other prices marked in words or pictures on the commodity details page (including the main picture) may be the price in a specific activity period, and the specific price of the commodity is subject to the price on the order settlement page or the actual transaction price negotiated after you contact the merchant; If you find the price or information of the event is abnormal, you are recommended to consult the merchant before purchasing

Ask the merchant

What about the product warranty?

Are there any other bus connector products?

What is the instrument type of the product?

Are there any other signaling products?

Are there any other applications?

Is it convenient to quote a price?

What express?

Is the quotation inclusive of ticket and shipment?

What are the main businesses?

What are the main products?

contact us

contact information

Contact: Manager Ma

mail box: 3165088973@qq.com

Tel.: 15,685,359,870

Contact address

No. 9, Floor 14, Hongshan Hotel (Bailing Hilton Yilin Hotel), No. 42, Hongshanhu Road, Beijie Street, Xixiu District, Anshun, Guizhou