Home > Products > Other special additives > German technical background VOK-AL WX Rheological additives For water-based systems replaces BYK-AL WX
German technical background VOK-AL WX Rheological additives For water-based systems replaces BYK-AL WX
- 100000 Kilogram / Kilograms per Month
- Nansha port
- T/T
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Protecting Products
- SIlica Gel Desiccant Fine Pore for Drying Flowers Moisture Damage
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Suppliers
- Hengyuan OEM production regenerating silica gel desiccant
- silica gel absorbent capacity in bags moisture absorbent
- 10 grams silica gel in bags moisture absorbent
Product Details
Brand Name: | vok specialty chemistry | Place of Origin: | China | Model Number: | VOK-AL WX |
Type: | Other, Rheological additives | Usage: | Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals |
Product Description
German technical background VOK®- AL WX rheological agent, based on activated layered silicate, is used to produce thixotropic flow behavior in water-based systems and mineral ready mixed mortar.
Product Information
Chemical composition activated layered silicate
Typical Physicochemical Data
The data given in this data are only typical values, not technical indicators of the product.
Specific gravity: 2.2 g/cm ³
Bulk density: 500-650 kg/m ³
Humidity: max. 13%
Purchase form: free flowing white powder
PH value (2% water): 10.5
Storage and transportation
VOK ®- AL WX
It is hygroscopic and should be transported in unopened original containers and stored in dry places at 0-30 ℃
Within the scope.
Special precautions
Preservatives (approx. 4%) should also be used in the preparation and storage of the main plaster.
Application field
Coating industry
Product features and advantages
VOK®- AL WX produces thixotropic flow behavior. Because of its good effect in preventing solid sedimentation, the processability and storage stability are improved. In addition, higher coating thickness can be obtained by reducing sagging tendency after construction. VOK®- AL WX is an inorganic substance, which is stable to dilute acid and alkali.
Recommended use
VOK®- AL WX is applicable to various water-based systems. Suitable for paints with neutral, acidic and alkaline pH.
Architectural coatings
Wood and furniture coatings
The recommended dosage is 0.3-2.0% (purchased form), which is based on the general formula and depends on the required performance of the formula.
The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.
Adding method and processing guidance
VOK®- AL WX is hydrophilic and easy to add to water. To ensure good distribution, efficiency and reproducibility in application, the additive must be slowly added to water (20 ℃± 5 ℃) under stirring, and pre dispersed at high shear force for at least 20 minutes. VOK ®- AL WX should be fully hydrated before the remaining formulation components are added to the dispersion. No wetting or dispersing aids are required for the production of dispersions.
Construction industry
Product features and advantages
In a free flow system, VOK ®- AL WX prevents sedimentation and dehydration shrinkage tendency of agglomerates. In the high solid building system, it can achieve smooth processability and improve the sagging resistance.
Recommended use
VOK®- AL WX
It is applicable to mineral based ready mixed mortar.
Self leveling mortar base
Self leveling bottom layer
Recommended dosage
The dosage of 0.05-0.5% additives (purchased form) is based on the total formula and depends on the required performance of the formula.
The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.
Adding method and processing guidance
VOK®- AL WX is hydrophilic and can be added to the dry mix mortar formula.
Detergents, detergents and curing products
Product features and advantages
VOK®- AL WX is a rheological agent that produces thixotropic flow behavior. It can be widely used in water-based systems to prevent the sedimentation of abrasives and other particles without excessive thickening. Including The cleaning products of VOK®-AL WX are easy to use and can be sprayed. The use of the additive improves the adhesion with the vertical surface, and improves the cleaning effect due to longer exposure time. VOK®- AL WX is stable to acids and alkalis with pH values ranging from 2-13. It has good electrolyte resistance to sodium salt and surfactant.
Recommended use
VOK®- AL WX is particularly suitable for water-based cleaning and curing products with a pH range of 2-13.
Floor polishing
Automobile cleaning and maintenance products
Living room cleaning products
Kitchen cleaning products
Wet room cleaning products
Detergent
Recommended dosage
The dosage of 0.5-2.0% additives (purchased form) is based on the total formula and depends on the required performance of the formula.
The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.
Adding method and processing guidance
VO ®- AL WX is hydrophilic and easy to add to water. In order to ensure good distribution, best efficiency and reproducibility in application, the additive must be slowly added to water (20 ℃± 5 ℃) under stirring, and pre dispersed at high shear force for at least 20 minutes. In order to achieve good dosage, The concentration of VOK ®- AL WX in the premix shall be 3-5%. The remaining formula components shall be fully hydrated before being added to the dispersion. No wetting or dispersing aids are required for the production of dispersions.
Special precautions
In addition to the rheological demand curve, the physical properties (color, transparency, etc.) and compatibility with the chemical environment of detergents and detergents also determine the selection of the most appropriate rheological additives
Construction industry
Product features and advantages
VOK®- AL WX is a multi-purpose and ultra pure rheological additive used to produce thixotropic flow behavior in water-based formulations.
Recommended use
VOK®- AL WX is especially suitable for water-based crop protection formula, based on lotion and lotion concentrated slurry, as well as suspension/suspension concentrated slurry and water dispersed particles.
Recommended dosage
0.05-1. 5% dosage of additives (purchased form) is based on the total formula and depends on the required performance of the formula.
The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.
Adding method and processing guidance
VOK - AL WX is hydrophilic and easy to add to water. To ensure good distribution, best efficiency and reproducibility in the application, the additive must be slowly added to the water (20 ° C ± 5 ° C) under stirring and pre dispersed at high shear for at least 20 minutes. In order to achieve good dosage, The concentration of VOK ®- AL WX in the premix shall be 5-7%. The remaining formula components shall be fully hydrated before being added to the dispersion. No wetting or dispersing aids are required for the production of dispersions.
Adhesives and Sealants
Product features and advantages
VOK®- AL WX produces thixotropic flow behavior in adhesives and sealants. Because it is very effective in preventing solid sedimentation, it improves processability and storage stability. Improve slip behavior, sagging resistance and ridge formation. VOK®- AL WX is an inorganic substance, which is stable to dilute acid and alkali.
Recommended use
VOK®- AL WX is applicable to various water-based systems. It can be used in adhesives and sealants with neutral, acidic and alkaline pH values.
Floor adhesive
Acrylate sealant
Wood glue
Recommended dosage
The dosage of 0.5-2.0% additives (purchased form) is based on the total formula and depends on the required performance of the formula.
The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.
Adding method and processing guidance
VOK®- AL WX is hydrophilic and easy to add to water. To ensure good distribution, best efficiency and reproducibility in the application, the additive must be slowly added to the water (20 ° C ± 5 ° C) under stirring and pre dispersed at high shear for at least 20 minutes. VOK®- AL WX should be fully hydrated before the remaining formulation components are added to the dispersion. No wetting or dispersing aids are required for the production of dispersions.
Contact Us
- Guangzhou Situyuan Chemical Co., Ltd
- Contact nameliaolijun
- Phone86-020-29863024
- AddressPanyu District Guangzhou,Guangdong
Defoamer | Leveling agent | Wetting dispersant | Wetting agent |
Other special additives |
- HAISU MAX 96-well Plate, 5 mg Sorbent per Well,Detachable , 30 µm, 2/pk
- HAISU MAX 96-well Plate, 2 mg Sorbent per Well,Detachable , 30 µm, 2/pk
- HAISU MAX 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MAX 96-well Plate, 60 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 20 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB-2 96-well Plate, 5 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB-2 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 20 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 5 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, Detachable 5 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, Detachable 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 3 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU HLB 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
- HAISU Silica SPE Cartridges, Silica, 40 - 63 µm, 60 Å
- HAISU Silica gel high-purity grade, pore size 60 Å, 70-230 mesh particle size, 63-200 μm particle size, for flash chromatography
- HAISU Silica gel high-purity grade, pore size 60 Å, 230-400 mesh particle size, 40-63 μm particle size, for flash chromatography
- Absorbent paper for flower pressing A4 A5
- Zeolite 4A molecular sieves for liquid coats and paints deep dehydrating
Popular Searches
- caustic soda flake
- sodium hydroxide
- caustic soda
- chelate agent
- Activated Carbon
- activated charcoal
- active carbon
- anthracite filter media
- Granular Activated Carbon
- Coconut Shell Activated Carbon
- Powder Activated Carbon
- Nut Shell Activated Carbon
- Honeycomb Activated Carbon
- Coal Activated Carbon
- Wood Activated Carbon
- Activated Charcoal Carbon
Find Similar Products By Category
- Chemicals > Catalysts & Chemical Auxiliary Agents > Chemical Auxiliary Agent
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
liaolijun
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-