Water Pump Plug Ceramic Piston Plunger for Water Jet Looms Textile Machine Parts

Water Pump Plug Ceramic Piston Plunger for Water Jet Looms Textile Machine Parts

Precautions for maintenance of ceramic plunger kit:

1. First of all, the choice of plunger is very important. High quality ceramic plunger is extremely wear-resistant and corrosion resistant; Under long-term work, high-quality plungers are less prone to rust and ceramics are less prone to yellowing than ordinary plungers.

2. The water used for weaving machine belongs to recycled water, and the water quality is relatively dirty. Ceramic piston is a precision accessory. To prolong its service life, it is necessary to regularly use neutral detergent to clean the pump plunger. Check the wear condition of the upper and lower check valves, the joints of the upper and lower water pipes, and whether the O-ring is leaking. When installing the water pump, check the position, shape and wear condition of each connecting part, adjust the water volume and pressure of the water pump, and ensure the working performance of the water pump.

3. Finally, when it is found that the shell of the ceramic plunger is seriously rusted and corroded, and the ceramic appears serious yellowing, cracking and missing angles, the use should be stopped immediately, and a new piston should be replaced in time to prevent affecting the production and processing work.

Plunger Material: 99 porcelain and stainless steel combination.

Installation and precautions: Since ceramic products are easy to be broken, special hexagonal wrench tools must be used during installation, so as to make multiple points on the outer circle of the column plug bear uniform force, so that the ceramics are not easy to be broken. The water quality must also be treated by a regular system to facilitate the service life of the plunger.

Ceramic plunger features:

1. The ceramic piston kit is made of high-performance technical ceramic materials, which have high hardness, wear resistance, high temperature resistance, corrosion resistance and other properties. Ensure reliable material performance.

2. The microporous structure obtained by the unique processing method on the ceramic plunger working face has the self-lubricating effect, which changes the poor sliding friction or jamming of the traditional plunger pump.

3. The inner cavity surface adopts fluid structure, and the ceramics have no dead corners and grooves. The internal cavity surface - plunger surface is processed to the mirror surface by using an advanced high-precision internal and external grinder, and the external surface is vibration polished for easy cleaning and disinfection.

4. The pump body structure is finely sealed with the product structure to facilitate disassembly.

5. The ceramic plunger kit has been tested for corrosion resistance, acid and alkalinity resistance, and its indicators have reached the level of similar products abroad.

The ceramic plungers are made of high quality raw materials, cold isostatic pressing forming way, and assembled with stainless steel metal parts after high temperature sintering. As one of the main components of the plunger pump, the ceramic plunger is matched with the plunger sleeve. Ceramic Plunger is a shaft type with regular shape, accuracy dimension.  Not only its shape and position accuracy are relatively high requested, especially its wear resistance and resistance to Corrosion are the most important properties. The performance of the metal plunger is much lower than that of the ceramic plunger. The ceramic plunger has high temperature resistance, wear resistance, corrosion resistance and impact resistance, which guarantees a longer service life. It is widely used in various liquid pumps, metering pumps, high pressure pumps, mud pumps, etc.

Pay attention to the following points during assembly:

First, as the ceramic plunger is a precise accessory, it needs extremely advanced equipment for testing before leaving the factory to ensure that the clearance between the ceramics meets the requirements.

Second, during installation ceramic piston kit, it is necessary to ensure that the contact surface of the sleeve is kept clean, and the sleeve and sleeve are kept in a sliding state.

Third, when installing the ceramic plunger, tighten the thread on the plunger until it is fastened to the base, and then use sealant to seal and reinforce it.

Fourth, it is better to use a special wrench for the installation and removal of the plunger to prevent the deformation and damage of the ceramic plunger caused by uneven force.