- wear resistant rod PAI plastic for radiation resistant industry
- Conductor Type Solid Polyamideimide 220 4.0mm*0.65mm Flat Enameled Copper Wire
- Conductor Type Solid Insulation Material Enameled 0.8-1.20mm Polyamideimide enameled aluminum Magnet insulated
- 2022 Newest factory Copper Clad Laminate Raw Material Polyimide Film
- 12.7 x 254 x 127 mm PI Board Raw Material Plastic Polyimide Sheet
- Custom Antistatic Vespel SP1 Polyimide Sheet Plastic Polyimide Sheet
PEEK (polyetheretherketone) plastic raw material is aromatic crystalline thermoplastic polymer material, its melting point is 334℃, with high mechanical strength, high temperature resistance, impact resistance, flame retardant, acid and alkali resistance, hydrolysis resistance, wear resistance, fatigue resistance, radiation resistance and good electrical properties.
PEEK board generally has the following types:
Peek-1000 (brown grey) : PEEK-1000 is made from pure polyetheretherketone resin, which has the best toughness and impact resistance among all PEEK grades. The PEEK-1000 can be sterilized using the most convenient disinfection methods (steam, drying heat, ethanol and Y-ray), and the raw materials used to manufacture the PEEK-1000 comply with the EU and US FDA regulations on food suitability, which makes it very popular in the medical, pharmaceutical and food processing industries.
Peek-hpv (black) : The result of adding PTFE, graphite, and carbon fiber, making PEEK-HPV a bearing-grade plastic. Its superior friction properties (low friction coefficient, wear resistance, high peak pressure limit) make it an ideal material for friction applications at this level.
Peek-gf30 (brown grey) : This material is filled with 30% glass fiber reinforced grade plastic, which has better rigidity and creep resistance than PEEK-1000, as well as better dimensional stability, and is ideal for manufacturing structural parts. It can withstand fixed load for a long time at high temperature. If the PEEK-GF30 is used as a sliding element, its adaptability should be carefully checked because the glass fiber scratches the mating surface.
Peek-ca30 (black) : The material is filled with 30% carbon fiber reinforcement, which has better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear resistance than PEEK-GF30, and the carbon fiber reinforced plastic has 3.5 times more thermal conductivity than the unreinforced PEEK plastic - faster heat dissipation from the bearing surface.
High temperature resistant
PEEK resin has a high melting point (334 ° C) and glass transition temperature (1 43 ° C), continuous use temperature of 260 ° C, its 30%GF or CF reinforced grade load thermal variation temperature up to 316 ° C.
PEEK(polyetheretherketone) plastic raw material resin has good toughness and rigidity, it has excellent fatigue resistance to alternating stress comparable to alloy materials.
The flammability of materials is the ability to maintain combustion after obtaining high energy ignition from oxygen and nitrogen mixtures. The accepted standard for measuring flammability is UL94 by first igniting a vertical sample of a predetermined shape and then measuring the time it takes for the material to self-extinguble. PEEK detection results in V-0, which is the optimal level of flame retardancy.
Measurement produced by plastic burning smoke standard for ASTM E662, this standard is to use America's national bureau of standards (NBS) laboratory for dust than optical density, measured by the standard shape sample of soot combustion production level of visible light dim, the test can be continued to burn (fire) or flameout (no flame), PEEK has the lowest fumigability among plastics.
Similar to many organic materials, PEEK mainly produces carbon dioxide and carbon monoxide during pythermal decomposition. Very low concentrations of gas can be detected by using the British aircraft test standard BSS 7239. This detection process requires complete combustion of 100 grams of sample in 1 cubic meter space, and then analysis of the gas produced in it. The toxicity index, defined as the ratio of the combined concentration of toxic gas produced under normal conditions to the dose that would kill a person in 30 minutes, was 0.22 for PEEK450G, and no acidic gas was detected.
The stability of PEEK plastic raw materials have superior dimensional stability properties, which are important for some applications. Changes in environmental conditions such as temperature and humidity have little effect on the size of PEEK parts, which can meet the requirements of high dimensional accuracy requirements.
1.PEEK plastic raw material injection molding shrinkage is small, which is very good for controlling the size tolerance range of PEEK injection parts, so that the size accuracy of PEEK parts is much higher than that of general plastics;
2. The coefficient of thermal expansion is small. With the change of temperature (which can be caused by the change of ambient temperature or friction heat generation during operation), the size of PEEK parts changes very little;
3. Good dimensional stability. The dimensional stability of plastic refers to the performance of dimensional stability of engineering plastic products in the process of use or storage. The change of this dimension is mainly due to the improvement of the activation energy of polymer molecules, so that the chain segment has a certain degree of curling.
4.PEEK has outstanding heat resistance and hydrolysis characteristics, and its water absorption is very low in high temperature and high humidity environment. It will not appear that the size of general plastics such as nylon changes significantly due to water absorption.
Stability of insulation
PEEK(polyether ether ketone) plastic raw material resin has good electrical insulation properties and maintains a high temperature range. Its dielectric loss is also small at high frequencies
Radiation resistance and peel resistance
PEEK(polyether ether ketone) plastic raw material resin has good radiation resistance and peel resistance, so it can be used to make electromagnetic wires for special purposes.
Because PEEK(polyetheretherketone) plastic raw material resin has the above many advantages, it has been widely used in many fields such as petrochemical, electronic and electrical, instrumentation, machinery and automobile, medical and health, aerospace, military nuclear energy and so on. Example: now more mature application in China are: air compressor piston ring, thrust ring, choke ring, valve plate, the bacterium type valve, the star wheel, sealing ring, valve seat, bearing cage, oil-free lubrication bearing, magnetic pump isolation cover, electrodes, gear, screw, electromagnetic wire, radiation protection window, microwave digestion tank, the wafer bearing device, etc.
Specification size of PEEK board: 5-100mm * 610/1000mm *1000MM
Specification size of PEEK rod: 3-200mm *1000MM
At present, there is no domestic manufacturer of PEEK board, mainly relying on imports. Produced in Germany, the United States, Japan and other places.
Guangzhou Yayan Plastic Products Co., LTD. Spot supply: PEEK board/rod, PPS board/rod, PVDF board/rod, PTFE board/rod, PSU board/rod, PEI board/rod, PI board/rod, PAI board/rod, PPO board / bar, PBT board/bar, CPVC board/bar, UPE board/bar, PETP board/bar, PC board/bar, POM board/bar, ABS board/bar, PMMA board/bar, PP board/bar, PE board / bar, imported PU board/bar, German PES board/bar, domestic PVC board/bar, Swiss engineering PBI board/bar, German PA nylon series board/bar/piece, MC nylon series board. Insulation materials: Taiwan red, black electric board, cold stamping board, phenolic laminated cloth bar board, heat insulation board, epoxy glass fiber bar board, epoxy board (FR-4) asbestos board, etc. Anti-static products: anti-static POM board/bar, anti-static organic board, anti-static PC board. Anti static PVC board/bar, anti static nylon board/bar synthetic SLATE and so on.
Welcome to call and visit to negotiate!
For more information, call 020-36228290
Mobile phone: 180 2748 2446
Contact person: Miss Huang
Guangzhou Yaliyan Plastic Co. , Ltd. is specialized in all kinds of engineering plastic semi-finished products. Product, Insulation Material Technology Research and development, production and sales of integrated enterprises. The company has always maintained a good partnership with professional manufacturers of engineering plastics and insulating materials at home and abroad, acting as agents for Taiwan, Germany, the United States, Korea, Japan, in order to meet the various development needs of our customers, switzerland and other countries of various, engineering plastics, insulation material plate, bar. Pipe. The company has always been adhering to the “Brand-first, technology-oriented, quality-oriented, Standard Development”business philosophy, customer satisfaction-oriented business philosophy and high-quality philosophy, committed to consolidating the brand, continuous development of new products, integrity services, quality and credit-based. To strengthen cooperation with the majority of customers, establish good relations. Our products include all kinds of plastic board, plastic sheet, plastic rod, industrial plastic products, anti-static plastic plate Rod and so on a series of plastic materials. IMPORTED PLASTIC MATERIALS: Peek Plate/stick, PVDF Plate/stick, PPS plate/stick, CPVC PLATE/PTFE plate/stick, Pei plate/stick, PBI plate/stick, Pai Plate/stick, Pi Plate/stick, PSU plate/stick, PES plate/stick, PPO plate/stick, PETP plate/stick, PBT plate/stick, UPE plate/stick, ABS plate/stick, POM Plate/stick, POM-esd plate/stick, PA plate/stick, PE plate/stick, PP plate/stick, Pu plate/stick, PC plate/stick, etc. . General Engineering Plastics: Acrylic Plate, plexiglass plate, ABS plate/bar, POM Plate/bar, PP plate/bar, PE Plate/bar, PS Plate/bar, PVC Plate/bar, etc. Plate, Bar, pipe. HIGH TEMPERATURE INSULATION MATERIALS: Red And black bakelite board, epoxy, cloth Bakelite, cold punching, phenolic laminate, FR-4 fiberboard, etc. , welcome to call to discuss contact telephone: 020-86214867 mobile phone wechat: 13501519803 fax: 020-86214867QQ: 2818809206 contact: Miss Huang
- Guangzhou Yaliyan Plastic Co. , Ltd.
- PBT Resin Price Per Kg Flame Retardant V0 Fiberglass
- High Quality Factory Natural Nylon PA6 Plastic Board Polyamide Plates PA6 Sheets
- polyethylene PE block UHMWPE plastic cutting board HDPE sheet
- Custom cheap High density polyethylene pe board
- Colorful 2-100mm Environment-Friendly Plastic Polyethylene PP/PE Sheet/Block/Plate
- HD Polyethylene sheets high density polyethylene PE panel HDPE sheet hdpe plastic plate
- PPS rod manufacturer 100% Virgin Material Medical Natural PEEK Bar/Rod
- Hot sale gf40pps board polyphenylene sulfide beige pps rod
- Manufacturer directly approves plastic semicircle plastic rod polytetrafluoroethylene rod plastic PP
- high temperature resistant natural plastic PEEK/ PPS/ PEI rod PEEK 450 bars
- Supply custom length high quality pps tube peek rod peek screw sheet tube
- Mc901 Price Of Per Kg Monomer Cast Nylon Sheet
- Hot sale PA6 Nylon Rod Monomer Cast Nylon Plate
- Fast delivery High Strength And Stiffness Mc Nylon Material Monomer Cast Nylon Sheet Parts
- Chinese suppliers plastic nylon sheet cutting board mc901 nylon plate/board
- 2023 Makrolon polycarbonate policarbonate sheet for light diffusion plate
- Wholesale inventory 5mm makrolon solid polycarbonate sheetste
- 6mm Clear Solid Polycarbonate Board,customized according to customer dimensions
- polymethylmethacrylate pmma granules for reflector 3d printing transparent pmma granules
- Cylindrical Transparent Polymethylmethacrylate PMMA Acrylic Sheet
- High quality transparent polymethylmethacrylate PMMA acrylic round rod
- Fast delivery Ready In Stock PE Sheet Extruder Machine 1400 mm Black HDPE
- Wholesale inventory High Quality Extruded High Density Polyethylene HDPE Sheets
- Chinese suppliers 1-100mm Plastic 100% Virgin Polyethylene PE HDPE Sheet Hdpe