750/900/914 multi-function horizontal hanging plate tile press, steel structure engineering equipment

1. Frame: 400 I-beam welding

2. Forming machine form: 1.5-2 inch chain drive

3. Shaft diameter: ¢90mm

4. Forming machine motor power: 22KW reducer

5. Forming machine line speed: 8-12m/min

6. Number of forming machine lanes: 20-25 channels

7. Roll material: 45# steel calcined parts

8. Hydraulic station oil pump: gear pump

9. Hydraulic station motor: 4-5.5KW

10. Cutting method: hydraulic shearing

11. Forming shear blade material: Cr12

12. Shear blade heat treatment: HRC58°-60°

13. Rolling thickness: 0.8-1.2mm

14. Material unfolding width: 1000mm

15. Length and length accuracy: ±2mm

16. The computer adopts PLC computer control system to configure manual unwinder, forming host, hydraulic cutter, electronic control system, hydraulic system, discharge rack, for floor bearing plate pressing type, replacing the traditional formwork, solving the shortcomings of the traditional formwork, fast and simple construction, neat and beautiful product appearance, with light weight, high strength, load-bearing and good seismic resistance.

Main features of floor deck equipment

1. Adapt to the requirements of rapid construction of the main steel structure, can provide a firm working platform in a short time, and can use multiple floors to lay profiled steel plates, layered pouring concrete slab flow construction.

2. In the use stage, the floor bearing slab is used as the tensile steel bar of the concrete floor slab, which also improves the rigidity of the floor slab and saves the amount of steel bar and concrete.

3. The embossing on the surface of the profiled plate makes the bonding force between the floor bearing plate and the concrete, so that the two form a whole, with stiffeners, so that the floor bearing plate system has a high bearing capacity.

4. Under the cantilever condition, the floor bearing plate is only used as a formwork. The length of the cantilevered can be determined according to the cross-sectional characteristics of the floor deck. In order to prevent the cracking of the cantilevered plate, negative ribs need to be attached to the support according to the design of the structural engineer.

High configuration adopts control system technology, simple and convenient parameter setting, high degree of automation, strong system self-learning ability, control elements are all composed of international brands, stable, high-precision automatic measurement length system, etc. Machine installation placed on a good and stable foundation can make the machine work without vibration, so as to ensure the precision, performance and life of the machine.