Mitsubishi PLC input module QX42

Mitsubishi PLC input module QX42

Mitsubishi QX42 product specification

Basic parameters of QX42: 24VDC, common terminal input of positive pole, 64 points

Overall dimension (H * W * D): 98 * 27.4 * 90 [mm]

Weight: 0.18kg

Input form: DC input module (positive common terminal type)

Input points: 32 points

Isolation method: optocoupler

Rated input voltage: DC24V (+20/- 15%, ripple factor is within 5%)

Rated input current: about 4mA

Enter the derating value: refer to the derating diagram

ON voltage/ON current: 19V or higher/3mA or higher

OFF voltage/OFF current: 11V or * * */1.7mA or***

Input impedance: about 5.6k Ω

ON ->OFF response time: 1ms/5ms/10ms/20ms/70ms or shorter (CPU parameter setting) initialization setting is 10ms

OFF ->ON response time: 1ms/5ms/10ms/20ms/70ms or shorter (CPU parameter setting) initialization setting is 10ms

Dielectric withstand voltage: 560VAC ms/3 cycles (altitude 2000m (6557.38 ft))

Insulation resistance: 10M Ω or higher measured by insulation resistance tester

Immunity: through 1500Vp-p voice voltage, 1 μ Voice simulator with voice width and voice frequency of 25 to 60 Hz

***Instantaneous voice IEC61000-4-4: 1kV

Protection grade: IP2X

Common terminal arrangement: 32 points/common terminal (common terminals: 1B01, 1B02, 2B01, 2B02)

I/O points: 64 (I/O allocation is set according to the 32-point input module.)

Operation indicator: ON indication (LED)

External connection: 40-pin connector

Applicable wire diameter: core 0.3mm2 (for A6CON1)

External wiring connectors: A6CON1, A6CON2, A6CON3 (optional)

Applicable connector/terminal block: A6TBXY36, A6TBXY54, A6TBX70

5VDC internal current consumption: 90A (standard: all points ON)

Mitsubishi QY42P is the output module of Mitsubishi Q series PLC, 12/24VDC, 64 points, with short circuit protection, 40-pin connector * 2, transistor leakage output. With short-circuit protection.

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.