Filter Inserts For CC Jensen CJC Oil Filtration Systems PD5600618,PD5600611,PD5600622,PD5600617,PD5600626

Carton packaging, wooden box packaging, can be packaged according to customer requirements

Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

Limited space, not one by one show, if demand, please contact, thank you!

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.

Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.

Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.

Prolonging the oil life time and avoiding oil change

EC Filter Inserts eliminate oil contaminants and oxidation catalysts, restore and maintain the oil in good condition.

Preventing failures and mitigating risk of downtime 

Clean oil ensures reduced wear, extended component lifetime and lower O&M costs

MS filter inserts

Specially designed for efficient water removal and maintaining low water levels

MS Filter Inserts adsorb all states of water - dissolved, emulsi­fied and free water from both mineral and synthetic oils. MS Filter Inserts contain Molecular Sieve, a super adsorp­tion media designed to efficiently remove water from oil. It is the preferred solution used to obtain and maintain very low water level in mineral transformer oils.  It can also be used to remove dissolved water from synthetic oils, glycol and ester based oils. 

The MS Filter Inserts must be used in combination with cellulose Filter Inserts as post filters, either in the last stage of a HDU multi stay Filter or in a HDU single stay Filter using hybrid Filter Inserts. 

Applicable in the following oils:

Mineral oil

Hydraulic fire resistant fluids (HFD) 

Glycol oil  - Polyalkylene glycols (PAG) 

Ester oil  - Polyolester oil (POE), Phosphate Ester Oil, Environmentally acceptable Lubricants (EAL) and biodegradable oils

Used in the following applications:

Transformer insulation

Gear and bearing lubrication

Hydraulic systems 

Compressor lubrication

Electro-Hydraulic control (EHC) of Steam Turbines

Turbine lubrication 

Engine lubrication 

User Benefits

Removing water

The MS Filter Insert has very high water adsorption and hold­ing capacity independent from oil temperature, base oil type and additives. It will adsorb and remove water from mineral and syn­thetic , glycol and ester based oils, no matter what state the water is in; dissolved, emulsified or free water.

Prolonging the oil life time and avoiding oil change

Water is an oxidation catalyst and primary cause of hydrolysis in ester oil leading to accelerated oil degradation. Removing water from the oil and keeping it dry result in extended oil life time.  

Preventing failures and mitigating risk of downtime 

Water causes friction, wear and  corrosion. Keeping the oil dry ensures extended component lifetime and lower O&M costs

We offer an extensive cross for the following brand

Our filtration equipment is used in a wide range of industries:

Advanced production process: