Provide original and genuine products MP6610 55V, 3A, Half-Bridge Power Driver

Description

The MP6610 is a half-bridge driver with current measurement and regulation features. It can deliver up to 3A of output current (IOUT) across a wide 4V to 55V input voltage (VIN) range. The MP6610 is designed to drive brushed DC motors, solenoids, and other loads.

An internal current-sense circuit provides an output voltage (VOUT) that is proportional to the load current. The MP6610 also features cycle-by-cycle current limiting and regulation. These features do not require the use of a low-ohmic shunt resistor.

Internal diagnostic and protection features include open-load detection (OLD), over-current protection (OCP), under-voltage lockout (UVLO) protection, and thermal shutdown. The MP6610 is available in TSOT23-8 and SOIC-8 packages. Due to the small pin spacing, the TSOT23-8 package is only recommended for applications up to 45V, unless conformal coating or encapsulation is used.

Advantages include:

    Wide 4V to 55V input voltage (VIN) range and high 3A output current (IOUT)
    Integrated current sense
    Low RDS(ON): 100mΩ HS-FET + 120mΩ LS-FET
    Available in small TSOT23-8 and SOIC-8 packages




Features & Benefits

    Wide 4V to 55V Operating Input Voltage (VIN)
    Up to 3A Output Current (IOUT)
    Internal Half-Bridge Driver
    Cycle-by-Cycle Current Limiting and Regulation
    Low On Resistance:
        100mΩ High-Side MOSFET (HS-FET)
        120mΩ Low-Side MOSFET (LS-FET)
    No Control Power Supply Required
    Simple, Versatile Logic Interfaces
    Inputs Compatible with 2.5V, 3.3V, and 5V Logic
    Open-Load Detection (OLD)
    Over-Current Protection (OCP)
    Under-Voltage Lockout (UVLO)
    Thermal Shutdown
    Fault Indication Output
    Thermally Enhanced Package
    Available in TSOT23-8 and SOIC-8 Packages

APPLICATIONS
  Solenoid Drivers
  Relay Drivers
  Brushed DC Motor Drivers