Mitsubishi iQ-R series CPU module Mitsubishi CPU module R32ENCPU

Mitsubishi CPU module R32ENCPU

Mitsubishi R32ENCPU parameter description: input and output 4096 points, built-in CC-Link IE, program capacity 320K steps, basic processing time (LD X0) 0.98ns, program memory 1280k bytes, peripheral device connection ports USB, Ethernet

[Basic specifications]

Operation control mode: storage program repeated operation

. Input and output control mode: refresh mode (* * * Direct access to input and output (DX, DY) can be performed after direct access to input and output)

. Program language: ladder diagram (LD), structured text (ST)

. Programming extension function: function block (FB), label programming (system/local/global)

. Program execution type: initial execution type, scan execution type, constant cycle execution type, event execution type, standby type

. Input/output points [X/Y] [points]: 4096

. Constant scanning (function to keep scanning time constant) [ms]: 0.2~2000 (can be set in 0.1ms)

[Instruction processing time]

. LD instruction: 0.98ns

. MOV command: 1.96ns

[ST language instruction processing time]

IF command: 1.96ns

CASE command: 1.96ns

FOR command: 1.96ns

[Memory capacity]

. Program capacity [step]: 320k

. Program memory [bytes]: 1280k

. SD memory card: SD memory card capacity (SD/SDHC memory card: 32GB)

. Soft component/label memory

Full capacity: 2316K bytes

Device area: 80K bytes

Label area: 180K bytes

Latch label area: 4 bytes

File store: 2048K bytes

. Data memory: 20M bytes

CPU buffer memory: 1072KB (536 words) (including constant period communication area (24K words))

. Refresh memory: 2048kb

[Number of stored files]

. Program memory (P: number of program files, FB: number of FB files):

380 (P: 124, FB: 64 (one file * * * can store more than 64))

. Software component/label memory (file storage area): 324 (whether or not extended SRAM card box is used)

. Data memory: 512

. SD memory card

NZ1MEM-2GBSD: 256 copies

NZ1MEM-4GBSD, NZ1MEM-8GBSD, NZ1MEM-16GBSD: 32767 copies

[Number of data storage folders]

. Data memory: 512

. SD memory card

NZ1MEM-2GBSD: 256 copies

NZ1MEM-4GBSD, NZ1MEM-8GBSD, NZ1MEM-16GBSD: 32767 copies

[Peripheral device connection port]

. USB2.0 High Speed (miniB) 1

. Ethernet(100BASE-TX/10BASE-T)

CPU department: 10BASE-T/100BASE-TX 1

Network unit: 10BASE-T/100BASE-TX/1000BASE-T 1

[Memory interface] SD memory card, extended SRAM card

[Other functions] Multiple interrupt function, PID control function, database function, data recording function, security function, inter-module synchronization function, SLMP communication function

[Number of input/output points] No CPU, 32 network units

[DC5V internal consumption current] 1.49A

[R32ENCPU overall dimension H * W * D] 106 * 27.8 * 110mm (H base plate installation part 98mm)

[Weight] 0.40kg

[Built-in CC-Link IE]

1. Transmission specification

. Data transmission speed

CPU Department: 100/10Mbps

Network unit: lGbps/l00MbPs/10Mbps

. Communication mode

1000BASE-T: no CPU, full duplex network unit

100BASE-TX: full duplex/half duplex

10BASE-T: full duplex/half duplex

. Interface: RJ45 connector (AUTO MDI/MDI-X)

. Transmission method: baseband

Frame capacity: 1518 bytes for CPU unit and 1518/9022 bytes for network unit (when using large frames)

. Large frame: CPU can not be used, network unit can be used

. Network segment length: 100m (length between hub and node)

. Series connection stage:

1000BASE-T: CPU department is unavailable, and network unit is different according to manufacturer

100BASE-TX: * * * more than 2 levels

10BASE-T: * * * more than 4 levels

. IP version: corresponding to IPv4

2. Memory for sending and receiving data/storage

. Number of simultaneous opening:

CPU part: 16 connections (connections available in the program)

Network unit: 64 connections (connections available in the program)

. Fixed buffer:

CPU Department: None

Network unit: 5K words * 16

. Socket communication:

CPU part: 5K characters * 16

Network unit: 5K words * 48

. Random access buffer: 6K words * 1

CPU Department: None

Network unit: 6K words * 1

[CC-Link IE field network performance specification]

. Number of connections per network

Main station: 1 set

Slave station: 16 sets

The number of stations occupied by the slave station: 1~4 stations

. Link points per network

RX/RY: 1024 points

RWr/RWw: 512 points

. Link points per station (master station)

RX/RY: 1024 points

RWr/RWw: 512 points

. Link points per station (master station)

RX: 64 points (occupied by 1 office), 128 points (occupied by 2 offices), 192 points (occupied by 3 offices), 256 points (occupied by 4 offices)

RY: 64 points (occupied by 1 office), 128 points (occupied by 2 offices), 192 points (occupied by 3 offices), 256 points (occupied by 4 offices)

RWr: 32 points (1 office occupied), 64 points (2 offices occupied), 96 points (3 offices occupied), 128 points (4 offices occupied)

RWw: 32 points (occupied by 1 office), 64 points (occupied by 2 offices), 96 points (occupied by 3 offices), 128 points (occupied by 4 offices)

UDP port number used in circular transmission: 61450

Instantaneous transmission capacity: 1920 bytes

. Transmission specification

Data transmission speed: 100Mbps

Series connection stage (100BASE-TX): the number of stages that can be connected at the time of switching to use the hub,

Please contact the manufacturer of the switching hub.

. Transmission line form: star

Communication cable: Ethernet cable meeting 1000BASE-T specification

Distance between stations: 100m (according to ANSI/TIA/EIA-568-B (Category 5e)

Mitsubishi PLC servo system controller MELSEC iQ-R series CPU model

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.