1734-IB8 Original US AB Rockwell PLC digital quantity Module Warranty POINTIO series

One in a box

About 1734-IB8

The 1734-IB8 is a point I/O input module built and designed by Allen-Bradley. It has been included in the C Series of Allen-Bradley dot I/O input modules and can be used especially with DeviceNet and Profibus communication adapters. The Allen-Bradley 1734-IB8-point I/O input module is used with RSLogix 5000 software that has been upgraded to version 11 or later and is available with ControlNet and Ethernet adapters. Allen-Bradley 1734-IB8-point I/O input module with locking mechanism and side writable tabs. It also features removable terminal blocks, built-in I/O modules and mounting pedestals. The Allen-Bradley 1734-IB8-point I/O input module can be mounted on a mounting base mounted on a DIN rail. This particular model has eight inputs with four status indicators. It features module status indicator, network status indicator and 24 volts DC input. The 1734-IB8 has a weight of 0.8 Nm or 7 lb on a 1-inch terminal base screw torque and a POINT bus current of 75 mA at 5 volts DC.

The isolation voltage of the module is 50 V DC. The voltage has been tested for 60 seconds at 2500 volts of direct current. The Allen-Bradley 1734-IB8-point I/O input module weighs approximately 32.3g, has a height of 56 mm, a width of 12 mm, and a length of 75.5 mm. The Allen-Bradley 1734-IB8-point I/O input module has a high ambient air temperature of 55 degrees Celsius and can operate in a temperature range of -21 to 55 degrees Celsius. As with any electronic device, it is recommended that it be installed in a clean and dry location, free of any substances that may cause corrosion in the important parts of the drive. In order to protect and preserve the life of the drive, it must be installed by an expert who knows the exact function of all relevant parts and equipment. The 1734-IB8 has an open housing type rating and can be mounted horizontally or vertically.