PAI SOLVAY Torlon AI-10/ AI-10 LS/ AI-10 LM Powder Polyamideimides

25kgs per carton.

Torlon® PAI (polyamide-imide) is the highest performing, melt-processable thermoplastic. The amorphous polymer has exceptional resistance to wear, creep and chemicals and performs well under severe service conditions up to 260°C (500°F). Torlon® PAI also has superior electrical and structural characteristics at high temperatures, an extremely low coefficient of linear thermal expansion, and exceptional dimensional stability. Typical applications include non-lubricating bearings, seals, valves, compressors, and piston parts, bearing cages, bushings, and thrust washers.

Find here Torlon® PAI grades
PAI SOLVAY Torlon® 4000T/TF
PAI SOLVAY Torlon® 4200
PAI SOLVAY Torlon® 4203/L
PAI SOLVAY Torlon® 4275
PAI SOLVAY Torlon® 4301
PAI SOLVAY Torlon® 4435
PAI SOLVAY Torlon® 4630
PAI SOLVAY Torlon® 5030
PAI SOLVAY Torlon® 7130
PAI SOLVAY Torlon® AI-10 / LS/ LM
PAI SOLVAY Torlon® AI-30/ LM
PAI SOLVAY Torlon® AI-50

Torlon® PAI Properties
* Unsurpassed wear resistance in dry and lubricated environments
* Maintains strength and stiffness up to 260°C (500°F)
* Very low-temperature toughness and impact strength
* Excellent resistance to wear and creep under load * Resistant to most chemicals, including strong acids and most organics
* Excellent compressive strength and extremely low CLTE
* Low flammability and smoke generation

Torlon® PAI Applications
* Typical applications include non-lubricating bearings, seals, valves, compressors, and piston parts, bearing cages, bushings, and thrust washers.
* Thermal isolators, sector gears, bushings, and screws.
* Hydraulic seal rings
* Seals and back-up seal rings, down-hole guides, labyrinth seals, bearings and bushings.
* Parts for wafer handling, bearing surfaces, parts carriers and IC test equipment sockets & handler.