|Brand Name:||BEST MAKE||Place of Origin:||China||Purity:||99.99%|
|MF:||3-30||Grade Standard:||Other, Chemical Grade|
Normal package is 20L or 30L plastic barrel for pimer and top coating; For mid coat,it's two component package with 1L and 5L plastic barrel separately.Samples are packed with 0.5L or 1.0L plastic bottle.
Granite Coating (Water-based PTFE Non-stick Coating)
1. Product Introduction
- W800-1011T（top）1.2 Properties
- High hardness, excellent scratch resistance and long-lasting non-stick performance and service life;
- Granite effect appearance;
- Environmental friendly water-based coating, free from PFOA;
- Excellent chemical resistance and abrasion resistance;
-In accordance with rules of FDA、LFGB、RoHS.
This series coating could be used on inside of aluminum fry pan, wok, soup pot, rice
cooker, electric high pressure saucepan, electric saucepan, baker, etc. As for specific use, please do complete applicability test.
2. Technical Parameters
or 15s-30s( mid )
Solid content, %
JIS K 6893—1995
Grey granite effect appearance
Color of the film surface
Same as standard
60 ° glossmeter
Hatch cross test 1.5mm×1.5mm,100/100
squares,3M adhesive tape10 times.
JIS K 6894—1996
Fry eggs at 160±10℃
3KG/21cm2 pressure, 3M 7447B abrasion pad, change a new pad once 250 cycles, 5% detergent solution.
Boiling in 10% salt water for 24 hours
Tested by SGS
Meet RoHS、FDA、LFGB standards
3. Mark, Packing, Storage & Transportation
The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc.
- Normal package is 20L or 30L plastic barrel for pimer and top coating; For mid coat,it's two component package with 1L and 5L plastic barrel separately.
- Samples are packed with 0.5L or 1.0L plastic bottle.
3.3.1 The coating should be stored at the temperature of 10℃-30℃,primer and top coat with shelf life for 6 months, mid coat with shelf life for 1 month. freezing is prohibited in winter.Transportation or storage at the temperature above 40℃ is forbidden;
3.3.2 Roll the pimer and top coating once a week at speed of 30rpm for 15min-30min；
3.3.3 For mid coat,shaking by hand lightly for 3-5 min is enough,violently shaking is not recommended；
3.3.4 The storage place should be well-ventilated and dry. Keep it away from direct sun exposure,ignition and heat source.
This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation.
4. Warranty Information
4.1 The accurate information provided here is from our lab, due to different testing conditions and methods applied is uncontrolled by us, this information shall not be treated as quality guarantee and inducement to infringe any patent.
4.2 JADE FLON guarantee that all products are qualified and in line with the sales description, if any products in violation of the guarantee,BM is limited to replacing any unqualified products.
5. Other Information
5.1 We recommend strongly reading the instruction book carefully. Do complete and detailed applicability test on the product before using.
5.2 JADE FLON has right to revise the product information. Please contact us if you need the new information.
- Quzhou Best Make Technology Co., Ltd.
- AddressKecheng District Quzhou,Zhejiang
|ECTFE Micropowder||PTFE Micropowder||PFA Micropowder||FEP Micropowder|
|PES Micropowder||PVDF Micropowder||PE wax||PTFE Dispersion|
|PES Dispersion||Coating||ECTFE Resin||PVDF resin|
|PFA resin||PTFE Resin||FKM|
- PES Micropowder
- PVDF Micropowder
- PE wax non-stick PE wax
- Polyethylene modified wax micropowder Good quality
- PTFE dispersion
- FEP Micropowder with flame resistance
- PES Micropowder Originally
- Polyethersulfone dispersion BSP-450
- PES dispersion water-based BSP-455
- PTFE micropowder lubricant
- ECTFE Coating Grade Resin
- ECTFE Water Film Grade
- PES Micropowder
- PTFE Dispersion JF-4DCA
- PTFE Dispersion JF-4DCD
- PTFE Dispersion JF-4DCF
- PVDF Micropowder
- Coating PTFE Micropowder