E0505S-1WR3 Mornsun SIP

E0505S-1WR3 Mornsun SIP

DC/DC module power supply

E05_ S-1WR3&F05_ S-1WR3 series

1W, constant voltage input, isolated non regulated positive and negative dual/single output

Product Features

Sustainable short-circuit protection

The no-load input current is as low as 5mA

Working temperature range: -40 ℃ to+105 ℃

Efficiency up to 85%

Isolation voltage 3000VDC

International standard pin method

SIP encapsulation

Meets UL62368, EN62368 certification (under certification)

05_ S-1WR3&F05_ The S-1WR3 series products are specifically designed for applications in distributed power systems on circuit boards that require the generation of a set (two sets) of power supplies isolated from the input power supply

And designed. This product is suitable for: pure digital circuits, general low-frequency analog circuits, relay drive circuits, data exchange circuits, etc

Note:

1. For packaging information, please refer to the "Product Shipping Packaging Information", packaging package number: 58200001;

2. If the product operates below the minimum required load, it cannot be guaranteed that the product performance meets all performance indicators in this manual;

3. The maximum capacitive load is tested within the input voltage range and under full load conditions;

4. Unless otherwise specified, all indicators in this manual are measured at Ta=25 ℃, humidity<75% RH, nominal input voltage, and output rated load;

5. All indicator testing methods in this manual are based on our company's corporate standards;

6. Our company can provide product customization, and you can directly contact our technical personnel for specific situations;

7. Product specifications are subject to change without prior notice