Semi synthetic multifunctional copper wire drawing lubricant

DRR B28 Semi synthetic multifunctional copper wire drawing lubricant 

Description 

This product is a multifunctional, semi formed lubricant formulated using high-performance additive technology.

Application

The stable formula system gives DRR B28 true versatility, which can enhance the following operations:

- Copper rod thinning      

- Middle and thin pull     

-  Multi line pulling         

-  Lacquered production wire drawing          

- Tin plated and silver plated wire drawing    

-  Annealing aids                  

DRR B28 has a wide range of uses, reducing the demand for additional products, thereby helping to reduce and control inventory. Eliminate or reduce errors caused by the use of multiple products.

Product Highlights

-  Multifunctional  

-  Very stable lotion with good lubricity and cleanness. 

-  The service life of lotion, drawing die and cone/winch is expected to be extended    

-  The surface of the workpiece becomes brighter and smoother after wire drawing.     

-  Strengthen with corrosion inhibitors to protect the surface of wires from oxidation and staining. Protect machine components from corrosion.    

-  Reduce wire breakage and waste.   

-   Low foam characteristics.    

-  Overall, DRR B28 improves wire drawing efficiency by increasing productivity and reducing downtime.     

Recommended Instructions For Use

The water quality has a great impact on the stability of the lotion of copper wire drawing solution. Ideally, the lower the hardness and salt content of the water used to prepare and supplement the lotion system, the bette

The ideal hardness level for the water used is 50-150ppm CaCO3, with a total conductivity of <150 ms/m.

The operating temperature of lotion should be kept at 35-45℃ to obtain the best effect.

DRR B28 is designed to work under more difficult conditions, but high operating temperature, very hard water and high salt content water will reduce the working life of lotion to some extent.

When preparing and topping up the lotion, always add DRR B28 to the water in the well stirred area of the lubrication system. Do not add water to the DRR B28 concentrate.

During use, it is important to maintain the emulsion tank level as consistent as possible by regularly adding water and lubricant concentrate when needed.

Recommended Lotion Concentration

Pole breakdown    50 - 60%

Intermediate      30 - 40%

Fine         15 - 30%

Annealing furnace   2.5 - 5.0%

 DRR B28 is recommended for use in environments with a diameter as small as 0.18mm.

Technical Data (typical test data)

Concentration Monitoring

The concentration of lotion is usually measured with a hand-held refractometer.                                                    

To obtain the actual concentration, multiply the refractometer reading by the refractive index of 1.10.               

e.g.Refractometer reading = 5.0

Refractive index    1.10

Reading actual concentration  = 5.5%

Packaging and Storage

DRR B28 is packaged in brand new iron drums with a net weight of 190Kg. 

Avoid direct sunlight and frost on the bucket. Store at a temperature of 5-35 ° C.  

                                              Nantong Inswell Lube Tech Co., Ltd

Factory address:  19-D, Zhennan Road, Jiang’an Town, Rugao, Jiangsu, China

Pre/Post-Sales Add: 21-601, Henghua Park, Wuxi ，Jiangsu, China

Email:  amy@czanthem.com

Web:htttp://inswell.cn