Sintered Porous Copper Filter for Gas Vent in Vacuum Mold

Product Introduction

The sintered porous copper filter for gas vent, specifically designed for vacuum mold applications, is a highly efficient filtration product that ensures gas purity and enhances performance in vacuum molding processes. This filter is manufactured using a sophisticated sintering process, which involves fusing copper particles together to create a porous structure with interconnected channels. This production technique allows for precise control over pore size, permeability, and mechanical strength, resulting in a filter optimized for vacuum mold applications.

Specifications:

- Pore Size:  30-40 microns

- Porosity: 30-40%

- Dimensions: 8*10mm

- Material: Copper powder

Features:

1. Enhanced Gas Purity: The sintered porous copper filter effectively removes impurities and particulates from gas streams, ensuring a clean and pure gas environment in vacuum molding processes.

2. Optimal Filtration Performance: With its precisely controlled pore size and high filtration efficiency, the filter captures and retains even the smallest particles, preventing contamination and maintaining the quality of the vacuum mold.

3. High-Temperature Resistance: The filter is designed to withstand the elevated temperatures encountered in vacuum molding applications, ensuring stability and consistent performance.

4. Corrosion Resistance: Made from high-quality copper, the filter exhibits excellent corrosion resistance, allowing it to withstand corrosive gases and maintain its effectiveness over time.

5. Easy Integration: The filter can be easily integrated into existing vacuum mold systems, facilitating seamless installation and replacement.

6. Extended Lifespan: The durable construction and high-quality materials of the filter contribute to its long lifespan, reducing the need for frequent replacements and enhancing cost-effectiveness.

Applications:

- Plastic and Rubber Manufacturing: Used in vacuum molding processes for the production of plastic and rubber products, ensuring clean and pure gas environments for high-quality moldings.

- Electronics Industry: Applied in vacuum molding applications for electronic components, maintaining a contaminant-free environment to ensure product reliability.

- Automotive Industry: Utilized in vacuum molding processes for automotive parts, ensuring precise and high-quality moldings for optimal performance.

- Medical Device Manufacturing: Employed in vacuum molding applications for medical devices, ensuring the purity and integrity of the molded products.

- Aerospace Industry: Used in vacuum molding processes for aerospace components, ensuring the production of high-performance and reliable parts.

Effectively solve the following problems:

1. Burning: When the filling capacity of the resin is faster than the exhaust, the air is compressed by thermal insulation, and the front end becomes high temperature. Depending on the situation, it may cause discoloration, burning and other problems.

2. Flashing: The temperature of the resin at the front end of the joint increases, the viscosity decreases, and flashing easily occurs. In addition, if air causes filling obstacles, the injection pressure rises, resulting in a slight opening of the mold, and overall flashing occurs.

3. Insufficient filling: Although there is no burning or flashing, the resistance caused by the air slows down the filling ratio, causing insufficient filling.

4. Bubbles and silver lines: Condensation of air and branches causes bubbles, silver lines, stains and other undesirable appearance problems.

5. Extended cycle time: If the resin temperature, mold temperature is increased, and the injection speed is reduced, although these adverse phenomena will not occur, the cycle time will be extended.

Save energy, time, and costs. If you consider the TX exhaust plug from the design stage, the number of mold trials, time, and consumables can be reduced.

Package and Shipment

1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation.

2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer's designated place without damage.

Contact Us

TEL: +8619992203758

FAX: 0917-3873009

Email:karrykang@bjygti.com

Company: TOPTITECH -- BAOJI YINGGAOCO., LTD

Website:/

ADD: No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China