IEC60335-2-80 Figure 102 Test Pin simulate wear on the bolt for the Ceiling Fan

IEC60335-2-80 Figure 102 Test Pin simulate wear on the bolt for the Ceiling Fan

Introduction：

The bolt that connects the down rod to the motor is replaced with the specially prepared test pin shown in Figure 102 that simulates wear on the bolt. The pin is fully inserted so that it connects the down rod to the motor.

The fan is supplied at rated voltage and operated at maximum speed. The pin is then partially withdrawn so that the motor is connected to the down rod by that part of the pin having diameter b.

The supply to the ceiling fan shall be automatically disconnected and the fan shall not be capable of operation without replacing the worn bolt.

Note: Due to the different sizes and positions of different fans, all sizes and pin apertures and positions need to be provided by the user according to their actual needs, and we will customize them according to their needs.

Sherry Xu

Tel:+86-0755-18820263964

Email:sherryxu@jusdatest.com