SYNTHITE AC-46 CLEAR AIR DRYING VARNISH

APPLICATION GUIDELINES

SYNTHITE AC-46 may be applied by brushing, dipping or spraying. For many applications it can be used as supplied, but when required it can be diluted. Dilution for spray application is usually with 20-25% of Dolph’s T- 200; for conformal coating applications with automatic machines the dilutor is Dolph’s T-200X.

The film thickness should be 40 microns maximum per each application in order to allow a complete solvent release and a proper cure. SYNTHITE AC-46 is air drying and it can be handled in 30 minutes. For optimum chemical and abrasion resistance, allow to dry in air for 24 hours at least.

Special precautions

When SYNTHITE AC-46 is applied by spray methods, care should be taken to keep clean the spraying area. Filters and other waste from the spraying area should be soaked in water and disposed off in safety containers. Due to their exothermic curing, droplets of overspray may generate huge amount of additional heat; take care on it.

STORAGE AND STABILITY

Store in a cool dry place (max 30°C) away from direct sunlight. Protect from moisture and humidity.

Shelf life is 24 months when stored in closed original container at max 30°C.

HANDLING PRECAUTION

SYNTHITE AC-46 must be intended for industrial/professional use only. For more details, see the SDS.