0510900024 AZPFF-11-016/016RCB2020MB two stages pump Atlas 804

Item

Gear pump series 

Material

Forged steel   Aluminum alloy

Features

More than 30 years experience in gear pump design and research. Professional specialized in hydraulic pump components of Komatsu construction Vehicle.

Owned-factory with competitive price

Quality and credit-reliable, complete varieties 

Advanced manufacture and test equipments

Product strength

1.      Shaft sleeves are imported form DAIDO Japan.

2.      Oil sealing is made by NOK Japan.

3.      Hydraulic pump mid-body is an extrusion molding which is produced by extruding machine (press power is 3600 Ton).

4.      Smooth surface, hard density of material.

5.      Complete variety for Komatsu (more than 200 kinds of Hydraulic pumps)

Classification

Construction Machinery Parts

Hydraulic pump Ass’y, Hydraulic pump parts/components

Quotation

Based on OEM parts or genuine parts, packing, quantity 

and other requirements

Sample

Available

Notes

for fast and accurate pricing information, We need more details:

l  your spec model of construction Vehicle

l  The hydraulic pump part number  (most important)

l  The photos of pump

l  The direction of rotation for the pump (anticlockwise or  clockwise)

Delivery time

3-15days after received payment or deposit

Package

Wood box inside, carton box outside of wood box

Shipment methods

1. For stock products in factory, quantity is less than 5pieces, Express delivery method.

2. For manufacturing products, quantity is more than 5pieces, cargo forwarder delivery method.

3. The clients’ advice is acceptable

After sales service

One year warranty

Usage introduction

1 .The Hydraulic Oil must be clean and fresh; the bad condition of Oil will damage and reduce working life of pump.

2. It will affect the working efficiency of pumps when the old pump and new pump connect together.

Installation and Operation Manual

In developed industry market, the spare parts of gear pump achieved sophisticated. Therefore, check of clean oil with operation before using pump.

The installation should be according to the ex-works technical documents of gear pump, and related specification of this manual, also the pump structure should be taken into consideration.

1.      Oil liquid cleanliness standard requirements up to NSA10 level---NSA11 Level (The average value of contamination performance indicators less CB/T14039-2002rule 19/16).In others words, when using new products, oil storage tank must be cleaned completely or oil filter vehicle should carried out clean the oil, and update filter. (New products and badly worn pump can also cause technical damaged problem),once iron pin entry into new-pump with oil. The customer must ensure clean oil-channel and take oil tank, update filter.)

2.      Program of pump drive shaft and machine output shaft is Max.0.05mm.The inside of spline bushing worn parts has been replaced at the proper time, or coaxial degree might have influence. Measurement the pump of brack installation and connection structure verticality is less 0.05mm. Machine drive and pump drive shaft concentricity is within 0.05mm.

3.      When replace new pump, it requires filling up with hydraulic oil from inlet position and turning a half circle to pump rotation. After installing, keep running 20 mins with low speed, check the connecting head and seal ring to make sure there is not leak oil or leak out of this pipe.  The machine will not run and burn shaft, if pressure is insufficient. In addition, check safety valves to make sure pump works smoothly. Gear pump overload (allowed 1.15 times under rated of pressure instantaneous overload about 1min) is allowed less than one minute.  Otherwise, it occurs leak oil, broke shaft, etc.

Contact info

Frank Wang   

Tel/Whatsapp: 0086 13014591760